Post 1 made on Wednesday February 15, 2006 at 18:01 |
Sean Smith Lurking Member |
Joined: Posts: | February 2006 7 |
|
|
Evenin' All. Tonights problem is this.....
I've just tried to programme my RC5400 cursor hard buttons to mimmic my sky cursor buttons, but it just takes me to the next page on my remote.
This is how i did it... load wizz.it then click on - Sky - Sky Properties - Hard buttons. Then i click on the cursor arrows one by one and learn the ir codes with my sky remote but then no look when i try it. I managed to do the vol+/- and ch+/- this way so why not the cursor???
the cursor buttons do beep when pressed so they do function.
can Anyone help me please......
Cheers...Sean
|
|
OP | Post 2 made on Wednesday February 15, 2006 at 18:20 |
Sean Smith Lurking Member |
Joined: Posts: | February 2006 7 |
|
|
OK sean Here's what you do..... Do a search for "cursor" in the forums, find someone who had the same problems and use the advice given to them... Should take less than 10 minutes....
|
|
Post 3 made on Wednesday February 15, 2006 at 19:57 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Turn off Cursor Navigation....
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
Post 4 made on Wednesday February 15, 2006 at 23:40 |
Peter Dewildt Loyal Member |
Joined: Posts: | July 2001 6,307 |
|
|
Go into Set Up and turn off Cursor Navigation...
|
Peter Pronto 1000 (retired), Pronto TSU7000, RFX6000 (retired) Pronto 2xTSU9600, RFX9400 |
|
OP | Post 5 made on Thursday February 16, 2006 at 04:08 |
Sean Smith Lurking Member |
Joined: Posts: | February 2006 7 |
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.