| Post 1 made on February 4, 2006 at 17:29 |
|
Joined: Posts: | February 2006 3 |
|
|
I have an EAD (Enlightened Audio Designs) Ovation Plus Pre-amp/processor and the remote control has died. Does anyone have codes for the following functions: Power
Analog
D1 - D6 sources Thanks in advance for any help from this board. |
|
| Post 2 made on February 4, 2006 at 23:33 |
|
Joined: Posts: RC XP: | August 2001 13,142 465⭐︎ |
|
|
You will find CCF files here. [Link: remotecentral.com] To use them, do File->Import CCF... from the NG software. |
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
| Post 3 made on February 5, 2006 at 10:46 |
|
Joined: Posts: | May 2002 3,238 |
|
|
I used to have that processor and I MISS IT! You can get all the codes from the unit itself there is a procedure of turning the unit off and then back on. Hold the front pannel button and the front of the unit will emit its codes. All its codes one by one. Including descret ON OFF and everycode on the remotes and some.
|
|
| Post 4 made on October 31, 2023 at 08:02 |
|
Joined: Posts: | October 2023 1 |
|
|
I screwed up and cleared the SRC-2000 SETTING and need help in restoring
|
|
| Post 5 made on October 31, 2023 at 20:43 |
|
Joined: Posts: RC XP: | August 2001 13,142 465⭐︎ |
|
|
The file above will get you the original IR codes but you'd need a Pronto Remote to load that file to teach the codes to your SRC-2000. So, I'm not quite sure where to go next for you. The remote in question may or may not be programmable. I've never heard of it.
|
Lyndel McGee
Philips Pronto Addict/Beta Tester
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
