|
|
|
Philips Pronto NG Family Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Topic: | 7000 squeeling??? This thread has 8 replies. Displaying all posts. |
|
Post 1 made on Thursday October 6, 2005 at 15:59 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
Here's a new one on me.
I modify a config I have used frequently. Client gets it and says the 7000 is making a high-pitched squeel, all of the time, except when it goes to sleep. Unit works but the noise is still there. Client is using RF, with RFX6000.
Hmmm.... we go through all of the firmware and PPENG version stuff, without any satisfaction.
Client talks to Philips. They suggest he return it to the dealer and get another. Dealer gives no satisfaction so Philips tells him to return. They do swap out and return to client. Client confirms the serial #'s are different.
Load config, still squeeling.
I remove the beeps I had programmed in for start and end of the macros. Squeel goes away! Hmmmm...
Client and I both determine we are 2.0.12.0 PPENG but client has upgraded to 3.7.7 firmware, also labeled TSU7000 2.1
Any ideas?
Thx Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Post 2 made on Thursday October 6, 2005 at 16:37 |
AVFriend Long Time Member |
Joined: Posts: | June 2004 331 |
|
|
Had the same problem when scrolling through the guide at a rapid rate. Pronto would continue to beep until I reset it. Hasn't happened yet with the latest firmware (3.8?)
|
|
Post 3 made on Friday October 7, 2005 at 01:25 |
Ernie Bornn-Gilman Yes, That Ernie! |
Joined: Posts: | December 2001 30,104 |
|
|
On 10/06/05 15:59 ET, ddarche said...
Here's a new one on me. Ah, rats. I was going to have you contact Dave....
|
A good answer is easier with a clear question giving the make and model of everything. "The biggest problem in communication is the illusion that it has taken place." -- G. “Bernie” Shaw |
|
Post 4 made on Friday October 7, 2005 at 10:11 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Dave, Read the thread by Carlton Bale. [Link: remotecentral.com]I think what you are seeing is similar to what he has posted. In a Macro, if I recall correctly, his beeps continued unless he put a delay right before the beep. What I think is happening is that you might have a high-pitched beep that is stuck on. Lyndel
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 5 made on Friday October 7, 2005 at 19:06 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
Thanks Lyndel.
LOL, Ernie. Yes, I want to be known as the guy who setup clients Pronto's to squeel...hehee
Maybe the client was gripping it too tightly?
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
OP | Post 6 made on Friday October 7, 2005 at 19:13 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
Hey Ernie,
By the way, I saw Hank from URC at CEDIA and sat through one of his classes. He dropped your name several times...FYI - you are famous...
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
OP | Post 7 made on Sunday October 9, 2005 at 10:17 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
One other interesting item, though. It did not squeel when downloaded to a pronto with the earlier firmware in it. Only when loaded on a pronto with the latest firmware.
Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Post 8 made on Sunday October 9, 2005 at 13:57 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,999 |
|
|
Dave,
Email the PCF to the ProntoTeam and indicate this is a problem with the latest firmware.
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|
OP | Post 9 made on Wednesday October 12, 2005 at 23:38 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
Lyndel.
Do you have that email handy?
Thx Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|