Your Universal Remote Control Center
One For All & Radio Shack Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


15-100 codes for Zenith DTT901 digital to analog TV converter box
This thread has 3 replies. Displaying all posts.
Post 1 made on Monday March 21, 2011 at 19:54
Lurking Member
March 2011
I tried to learn the IR codes - the remote said "success" after a few tries but it works poorly. The power sequence seems to repeat so the box appears to turn on briefly and shut off. The up channel button is the only one I got to work. I thought one of the VCR or other zenith preprogrammed codes might work as I really only need power and channel up/down but none of them seemed to work so I tried learning. Am I going to have to resort to JP1?

Last edited by Jim1 on March 21, 2011 21:50.
Post 2 made on Monday March 21, 2011 at 21:54
Active Member
December 2002
01414 should work. Power and channel up/down are 00053, 00181 and 00185.
OP | Post 3 made on Monday March 21, 2011 at 22:13
Lurking Member
March 2011
I found that code 01414 works great after finding this info:


Update: Thanks mdavej. I didn't see your post until after I tried it. Good to know that is the right one.
Post 4 made on Sunday February 19, 2023 at 23:57
Junior Member
February 2023
Before resorting to JP1, you may want to try a few troubleshooting steps to see if you can get your remote working better. Some things you can try include:

Resetting the remote and trying to learn the codes again.
Checking the batteries in the remote to make sure they're fresh and properly installed.

Moving closer to the device you're trying to control to see if that improves the signal.

Checking the device itself to make sure there aren't any issues with the IR receiver.

If none of these steps help, then JP1 may be a good solution. Just keep in mind that it can be a bit complicated to set up, so you'll need to be comfortable with technology and willing to invest some time and effort to get it working properly.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse