|
|
|
One For All & Radio Shack Forum - View Post
|
|
|
|
|
|
|
The following page was printed from RemoteCentral.com:
AUX on 4041 can't control Panasonic VCR
| |
|
Topic: | AUX on 4041 can't control Panasonic VCR This thread has 6 replies. Displaying all posts. |
|
Post 1 made on Thursday January 27, 2005 at 11:45 |
RobertaZimmerman Long Time Member |
|
|
I bought a 6131 to replace the 4041 as I wasn't able to set the DVD input and Vol Off functions of my Integra A/V receiver - all is well now. I decided to use the 4041 to operate our den system consisting of an Expressvu 3100, Sony XBR, Toshiba DVD player and Panasonic VCR.
All worked well until I tried to use the AUX button to control the VCR. I reassigned the AUX button to DVD/VCR and then used code #1062 to assign the Panasonic to this key (I tested #1062 with the DVD/VCR button and it works well). The light blinks twice as it should when I'm finished and when I reassigned the AUX button, but nothing happens when I try the Power or any other buttons. Is there a way to restore the AUX button back to factory settings so that I can start over from scratch? Failing that, do you have any other advice?
Roberta
|
|
Post 2 made on Thursday January 27, 2005 at 13:32 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
Is this how you did it:
1. press and hold SET/SETUP for two blinks 2. enter 9-9-2 3. press VCR 4. press AUX
5. press and hold sET/SETUP for two blinks 6. enter 1-0-6-2
|
|
OP | Post 3 made on Thursday January 27, 2005 at 23:52 |
RobertaZimmerman Long Time Member |
|
|
Yes, and I got two blinks after 1-0-6-2, meaning that all was well. As I mentioned, if I program the DVD/VCR button with 1062, it controls the Panasonic without problems. Yet I can't seem to get the AUX button to perform the same function.
Roberta
|
|
Post 4 made on Friday January 28, 2005 at 00:12 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
I guess the 4041 lacks the ability to reassign devices.
|
|
OP | Post 5 made on Friday January 28, 2005 at 00:51 |
RobertaZimmerman Long Time Member |
|
|
The manual states that it can reassign devices. In fact I previously had the AUX button controlling my Toshiba VCR by reassigning it as a "DVD/VCR" button on the 4041.
Roberta
|
|
Post 6 made on Friday January 28, 2005 at 01:21 |
edmund Elite Member |
Joined: Posts: | April 2002 13,839 |
|
|
Try restoring the AUX to AUX,
1. press and hold SET for two blinks 2. enter 9-9-2 3. press AUX 4. press AUX again.
Make sure you're entering 9-9-2, and not 9-9-4 which you use when you keymove?
|
|
OP | Post 7 made on Monday January 31, 2005 at 22:14 |
RobertaZimmerman Long Time Member |
|
|
Holy mackanoony! I'm not sure why this works, but if I don't reassign the AUX key as a DVD/VCR key, I can use the 1062 code on the AUX key and control my VCR. Yet I needed to reassign the AUX as DVD/VCR in order to control my Toshiba VCR. You probably can't see this, but I'm really scratching my head over this one.
Thanks.....yet again.
Roberta
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|