|Post 1 made on Saturday April 12, 2003 at 16:00|
So has anyone discovered why during the upload/download process that the iProntoEdit software on my laptop only "finds" my iPronto about one time out of every 5 tries?
I don't have to change any settings, it just doesn't seem to be able to find it unless I make the attemp about five times on average.
I have about an 80% or better signal on both the PC and the iPronto. Using Linksys WAP w/signal booster network is DHCP.
|Post 2 made on Saturday April 12, 2003 at 20:31|
I cant help you with your problem. But how do you like your signal booster? Does it make a huge difference?
|OP | Post 3 made on Saturday April 12, 2003 at 20:40|
I love it! At least a 50% improvement. Seems a little funny to gain that much improvement by only boosting one end, perhaps it bumps the gain on the receiving side too.
Regardless, it was one of the best $79 (buy.com) purchases I ever made. I recommend it highly!
|Post 4 made on Sunday April 13, 2003 at 08:15|
I have the exact setup (the iPronto is close to the Linksys signal booster antennas) and it finds iPronto everytime/first time unless the iPronto is in sleep mode- I usually leave iPronto plugged in and sleep timeout set to 'always on' when programming/downloading so this does not happen
|Post 5 made on Sunday April 13, 2003 at 10:13 |
We just did a 4 story townhouse and the linksys 54G is on the ground floor. The booster gives us a 92% signal strength on the roof deck. My ipronto just freezes allt eh time, other than that........
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.