Post 1 made on Tuesday September 23, 2008 at 03:15 |
Dolby2000 Long Time Member |
Joined: Posts: | September 2008 19 |
|
|
Hi,
AS per my other post, the database doesn't have my *exact* model (42PC7RVH) but comes close with the 42PC7RH - which is pretty much identical. All the codes work and I even have some discrete codes which aren't on the OEM remote.
My inputs are :
TV (have discrete code) (inputTV) AV1 (have discrete code) (inputVideo1) AV2 (have discrete code) (inputVideo2) Comp 1 (have discrete code) (inputComp1) Comp 2 (have discrete code) (inputComp2) RGB (have discrete code) (inputRGB/PC) HDMI 1 (toggle) (inputHDMI) HDMI 2 (toggle) (inputHDMI)
You'll notice the issue I'm having is with the HDMI as I don't have discrete codes for either HDMI 1 or HDMI 2. It's a toggle, so if on '1' and pressed it goes to '2' and vica versa.
Is there a way to enter *two* buttons as an input at all? If I could have it press 'inputTV' and then 'inputHDMI' all would be well because it'd end up going to HDMI1 ;)
|
|
Post 2 made on Tuesday September 23, 2008 at 15:30 |
hhatkin Long Time Member |
Joined: Posts: | February 2008 461 |
|
|
You could set an Activity to set the input to InputTV and then include the HDMI1 as Additional Command When Activity Starts.
|
|
Post 3 made on Tuesday September 23, 2008 at 16:34 |
jlet Super Member |
Joined: Posts: | March 2004 2,631 |
|
|
Note: The Activity Start/Exit macro feature becomes available when you review the activity and select "Yes, but I want to add more control of options and devices for this Activity". Just press next/save a few times until you reach the feature.
|
H659, H680, SA8300HD, TH-50PZ850, AVR-X4000 |
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.