Hello I have Panasonic PA20 and PX20 Discrete power on and off. They sent them to me in some strange KASEIKYO FORMAT With Custom Codes and Data Codes where do i put them to make them into hex or atleast drop them into a pronto?

From previous threads these models apparently do not have a discrete On command, yet all others while the 6UY models do not have discrete inputs. I suspect the files to be the same as others have gotten from Panasonic- however can you post the contents or email me the files and I'll attempt to decipher.

dwg

Digitalsteve,

Could you please email me that file and put a description in the subject line like KASEIKYO FORMAT that won't make me think its the latest virus :-)

I know how to decode them and I'd like to see if there is something new contained in that.

email address in my profile.

-Jon

Here is the translation:

Custom Code=800 Data Code=3D ==> Device=128 Sub-device=0 Function=61 POWER ON
Custom Code=800 Data Code=3D ==> Device=128 Sub-device=0 Function=61 POWER OFF
Custom Code=800 Data Code=05 ==> Device=128 Sub-device=0 Function=5 TV/VIDEO SELECT
Custom Code=800 Data Code=20 ==> Device=128 Sub-device=0 Function=32 VOLUME UP
Custom Code=800 Data Code=21 ==> Device=128 Sub-device=0 Function=33 VOLUME DOWN
Custom Code=800 Data Code=34 ==> Device=128 Sub-device=0 Function=52 CHANNEL UP
Custom Code=800 Data Code=35 ==> Device=128 Sub-device=0 Function=53 CHANNEL DOWN
Custom Code=804 Data Code=DE ==> Device=128 Sub-device=4 Function=222 ASPECT
Custom Code=800 Data Code=50 ==> Device=128 Sub-device=0 Function=80 PICTURE MODE
Custom Code=800 Data Code=51 ==> Device=128 Sub-device=0 Function=81 AUDIO SELECT

Unfortunately, Power On and Off are the same command and that command is used as the Power toggle for about every Panasonic TV, RPTV, Plasma, and LCD made.

AFAIK, the rest of the commands are also toggles and I suspect they are already all on the OEM remote.

All 256 commands have been tried for Device 128 and both sub device 0 and sub-device 4 for 512 commands. I was hoping that there would be some clue to a new sub-device.

I wish I had a better answer for you.

-Jon

I also had that file, and it included Component 1, Component 2, PC/VGA etc.., I realize that Power is a toggle, but how would you convert the KASEIKYO FORMAT to say a Pronto Code.

11.AV INPUT 1 800 01
12.AV INPUT 2 800 02
13.AV INPUT 3 800 03
14.Component 1 804 7C
15.Component 2 804 7D
16.PC 1 800 7A

Thanks in advance.

Device Code: 128 Function: 1 Vid 1
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0ACE
Device Code: 128 Function: 2 Vid 2
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0ACE
Device Code: 128 Function: 3 Vid 3
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0ACE
Device Code: 128 Function: 122 PC
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0ACE

Device Code: 128.4 Function: 124 Comp 1
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0ACE
Device Code: 128.4 Function: 125 Comp 2
0000 0070 0000 0032 0080 0040 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0010 0030 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0010 0010 0030 0010 0010 0010 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0030 0010 0ACE

Thanks so much, Component 1 & 2 work great.

By the way, how do you get the Pronto info, is there some encoder that you use?

I really appreciate your doing those.

Thanks

I use a decoder MakeHex, written by John Fine who is also active here. [Link: remotecentral.com]

-Jon

I have an MX850, can anyone tell me how to get these codes to work with this remote. Thanks in advance!

Mike

Mike, I know nobody's answered you in a terribly long time. I'll answer it here to hopefully help others in the same boat. (I also have an MX-850 and a Panasonic LCD Projection TV and have been having the same issues.)

To get hex codes into the MX-850:

• Download prontoEdit4 from the Pronton original software section and install.


• run ProntoEdit




• It will come up asking if you want TSU-1000 or TSU-2000... for this operation, it probably doesn't matter, but chose TSU-2000 just so we're on the same page


• On the left-side, you should have HOME, DEVICES, and MACRO GROUPS
  
• right-click on DEVICES and chose "Add Device"


• Now, the DEVICES item will have a + next to it...


• click on the + to DEVICES


• now, right-click on the item called "device" and chose "Add Panel"


• This should bring up a panel window to the right


• right-click anywhere inside it and chose "Add Button"


• now, double-click on your new (rather ugly) button


• it will bring up a "Button Properties" window with tabs for "Actions, Properties, Icons, and colors"


• make sure you're in the Actions tab


• click "Set IR"


• click "View IR >>"


• PASTE your IR Hex into that text area


• Click OK


• You may optionally go back and put a label on by double clicking the "C []" line in the "Button Properties"|Actions window, then clicking the blank bar just below the word "Label"


• Click OK (twice) when you're done labeling to get back to "Button Properties"|Actions


• optionally, go to the Properties tab to add a VISIBLE label to the button (handy if you are doing multiples in one shot)


• click the blank bar uner the word "name" and give it a short but meaningful name


• click OK


• If you want the name to show up, you MUST chose a font from the dropdown list below the name box


• (you can change the location and sizing of the box in this screen as well)


• click OK and you now have your new button.


• if you have multiple buttons, it's possible to highlight your new button, control-c to copy, then control-v to paste.
  (note: it pastes EXACTLY ON TOP of the other button, so once you paste, drag the button somewhere else on the window to uncover the original)


• It's MUCH quicker to copy/paste like that and then just edit the buttons, changing the name and code without having to go through all those little steps


• When you're happy, save the file.




• NOW, open your MX-850 editing program




• on the menu icons bar below the menu with "File, Program, Communications, Help", go to the second-to-the-right icon (looks like a square with a triangle, square and circle inside it and it's just to the LEFT of a thing that looks like a satellite dish)


• That's the Universal Browser... click it


• that pops open a new window


• use the OPEN icon to browse to any CCF file on your system (in this case, the file you created in the last section)


• you will have to drill down to your device and the panel you created


• now, DRAG AND DROP the button you created to a button on the image of your MX-850, and the LEARNED DATA that you entered in will be copied over.
  (NOTE this will NOT work with codes from the Pronto buit-in database... only those you learn or manually paste the hex into)