| Post 1 made on Saturday May 20, 2023 at 15:34 |
Since the Magnetar UDP800 is an 'Oppo clone' it seemed like trying the IR codes for the Oppo's was worth a try. They work !!!
For those using URC CCP database it is 'BR/DVD' 341 (Oppo 103) or 384 (Oppo 203).
For those using Harmony you can enter the Oppo models as the component.
Edit: After further testing all the commands work EXCEPT the discrete ON and OFF, which is a pretty big problem, but can be worked around. Starting the Magnetar UDP800 by sending the 'eject' command which opens the drawer and turns it on.
To turn off the Magnetar I have programmed the 'power' (toggle) into the 'off' macro.
Hopefully Magnetar will update their firmware to include these discrete commands.
|
tngiloy |
|
| Post 2 made on Sunday May 21, 2023 at 15:07 |
buzz Super Member |
Joined:
Posts: | May 2003
4,371 |
|
|
It's common for players to use Power toggles. I find that Play will usually power up a unit. The OFF command becomes a Play - Power macro. You may need to fuss with the timing between Play and Power.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
