|
|
|
The following page was printed from RemoteCentral.com:
Can't get Select button on Charter...
| |
|
Topic: | Can't get Select button on Charter remote to work with TCL tv This thread has 47 replies. Displaying posts 1 through 15. |
|
Post 1 made on Saturday May 13, 2017 at 09:41 |
Used code 11756 and now Charter/Spectrum 1060BC3 remote will turn on TCL Roku 32S3750 tv and move directionally, but the Select button will still only work for cable box, not for TV. Anyone know what to do? Thanks in advance
Last edited by simp00 on May 13, 2017 10:43.
|
|
Post 2 made on Saturday May 13, 2017 at 10:25 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On May 13, 2017 at 09:41, simp00 said...
Anyone know what to do? Hire a pro?
|
"Quality isn't expensive, it's Priceless!" |
|
OP | Post 3 made on Saturday May 13, 2017 at 10:34 |
Perhaps I should have been more specific. In researching this problem, I saw that other folks in this forum had the same issue, but with a different brand of tv. The "pros" in their threads knew of a secondary code to enter that solved the problem. Does anyone know a secondary code for this particular combination of tv and remote? Again, thanks in advance.
|
|
Post 4 made on Saturday May 13, 2017 at 12:59 |
3FG Select Member |
Joined: Posts: | August 2009 1,861 |
|
|
With 11756 assigned to the TV device button, 1) Press TV 2) Press Setup until 2 blinks 3) Enter 994 (the remote should blink twice) 4) Tap Setup briefly 5) Enter 00169 6) Tap OK/Select The remote should blink twice. With this arrangement, when the remote is in TV mode, the TV button LED should light up when pressing OK/Select and send the appropriate OK/Select signal. Conversely, when in CBL mode the CBL button LED should light.
|
|
OP | Post 5 made on Saturday May 13, 2017 at 14:44 |
Awesome! 3FG instructions nailed it -- a true pro. Thank you so much!
|
|
Post 6 made on Tuesday October 17, 2017 at 16:17 |
ScottDixon22 Lurking Member |
Joined: Posts: | October 2017 1 |
|
|
On May 13, 2017 at 12:59, 3FG said...
With 11756 assigned to the TV device button, 1) Press TV 2) Press Setup until 2 blinks 3) Enter 994 (the remote should blink twice) 4) Tap Setup briefly 5) Enter 00169 6) Tap OK/Select The remote should blink twice. With this arrangement, when the remote is in TV mode, the TV button LED should light up when pressing OK/Select and send the appropriate OK/Select signal. Conversely, when in CBL mode the CBL button LED should light. It looks like this is ALMOST the solution for my case. When I did this, I can go to places like Smart Hub, but when I click the OK/Select button, on the TV it says "not available." Any further ideas? Thank you!
|
|
Post 7 made on Wednesday May 8, 2019 at 20:42 |
kgossenisadick Lurking Member |
|
|
I literally took the time to create this account just so I could state what should be painfully obvious. kgossen is a dick. Nobody is hiring a "pro" for the minor inconvenience of needing 2 remote controls. 3FG up there gets it. He's not a dick. He's, from all that I know of him (which is he's not kgossen, the dick), a stand-up guy. It's real easy, kgossen, to not be a dick. When you feel that you are at the point of being a dick, you simply (and I cannot stress this enough) DON'T BE A DICK. Thank you 3FG. My issue is resolved. kgossen's issues (like being an utter drain on society, i.e. A DICK) may never be resolved. God speed, everyone. Except for kgossen, you twatwaffle. (Bet you thought I was going to call him a dick...)
|
kgossenisadick and a tool, and a douche...etc. |
|
Post 8 made on Friday May 17, 2019 at 09:54 |
mdavej Active Member |
Joined: Posts: | December 2002 627 |
|
|
.
Last edited by mdavej on May 21, 2019 17:10.
|
|
Post 9 made on Saturday July 20, 2019 at 03:21 |
Kristie54601 Lurking Member |
|
|
Ok - Can you please post the code for my LG? I have the same problem. Also - just in case - what it the code to change it back to its default.
Thank you. Your the only person I found that seemed to even understand there is a problem.
|
|
Post 10 made on Saturday July 20, 2019 at 16:18 |
edmund Elite Member |
Joined: Posts: | April 2002 13,857 |
|
|
Try 00164 for LG. If you need to erase it, do the following
1. Tv 2. Press and hold setup for two blinks, then release 3. Enter 9 9 4 4. Press Ok 5. Press OK again
|
|
Post 11 made on Thursday August 1, 2019 at 12:08 |
Kat92 Lurking Member |
Joined: Posts: | August 2019 1 |
|
|
Can you provide the code for Samsung?
|
|
Post 12 made on Thursday August 1, 2019 at 22:01 |
edmund Elite Member |
Joined: Posts: | April 2002 13,857 |
|
|
If you're using tv code 10812, the ok command is 00069.
|
|
Post 13 made on Saturday September 7, 2019 at 16:52 |
Timboiätä Lurking Member |
Joined: Posts: | September 2019 3 |
|
|
Hi guys, I have the same problem but with a Sony XBR ... doesn't anyone have the code to get the ok/select button to work with my tv? Would make my day haha this is driving me nuts!
|
-Tim |
|
Post 14 made on Saturday September 7, 2019 at 17:06 |
edmund Elite Member |
Joined: Posts: | April 2002 13,857 |
|
|
|
Post 15 made on Saturday September 7, 2019 at 19:13 |
Timboiätä Lurking Member |
Joined: Posts: | September 2019 3 |
|
|
Doesn't seem to work ... maybe I should reset it, start all over.
This is what I did
1. press tv 2. press setup until two blinks 3. entered code 10000 4. tapped setup again 5. entered 00255
I also just tried steps 1 through 3 and on step three entered code 00255 also to no avail ... Am I doing something wrong? should I factory reset or something? Thanks for your help either way, much appreciated!
|
-Tim |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|