HI there,

I have been trying to convert pronto ir codes over for global cache without any luck. i can successfully program buttons from the pioneer remote because i can increase the gap size to make it work during learning, but the shorter pronto codes i happened to find at the manufacturer website don't work at all. has anyone had any luck getting pioneer AV receiver discrete IR codes to with with the itch wf2ir?

another weird thing is that my pioneer receiver shows vsx820 on the front and vsx920k on the back. are all units like this?

i have been using with no luck:
power off:
0000 006d 0000 0022 0155 00ac 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0594

power on:
0000 006d 0000 0022 0155 00ac 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0594

Your Pronto Hex is shooting at 38KHz, but should be at 40KHz.  Why not use the 820 codes available here?

They'll give you the correct frequency.  For example
Off -- Pioneer IR protocol, device 165, function 27

Try using the 821 codes. There was an issue with the timing gap (I think that's the proper term) with some models and I corrected it for the x21 models.

i am not sure about the code above because I actually found another solution. what i had was a old pronto remote that already had the discrete code programmed into my macro. I made the Itach wf2ir learn the entire macro and i just cut pieces off of it where I think was the end and start of the next code in the chain. what i noticed is that Itach generally ends a code with a 4 digit number and starts the next code with a 3 digit number ( in my case 342 ). Then I pasted the code with a prefix of "sendir,:,1,,,1," and this works. I changed the frequency to what I was getting from my pioneer remote because I figured it would be the same frequency anyways.

below is what I have:

pioneer VSX-920K pronto hex: (keep in mind that I do not have the original pronto discrete codes of these so they were actually converted from GC format with iConvert.exe from their website)

power off:
0000 0066 0000 0044 0156 00AB 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 0596 0156 00AB 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 0FCD

power on:
0000 0066 0000 0044 0156 00AB 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 0596 0156 00AB 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 003F 0016 0014 0016 0014 0016 0014 0016 003F 0016 0014 0016 003F 0016 0014 0016 0014 0016 003F 0016 003F 0016 003F 0016 0FCD

Pioneer VSX-920K GC codes:
power off:
sendir,:,1,40453,,1,342,171,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,63,22,20,22,20,22,20,22,20,22,20,22,63,22,20,22,20,22,63,22,63,22,63,22,1430,342,171,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,63,22,20,22,20,22,20,22,20,22,20,22,63,22,20,22,20,22,63,22,63,22,63,22,4045

power on:
sendir,:,1,40453,,1,342,171,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,63,22,20,22,20,22,20,22,63,22,20,22,63,22,20,22,20,22,63,22,63,22,63,22,1430,342,171,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,20,22,63,22,20,22,63,22,63,22,20,22,63,22,20,22,20,22,63,22,20,22,63,22,63,22,20,22,20,22,20,22,63,22,20,22,63,22,20,22,20,22,63,22,63,22,63,22,4045


updated:
seems like the codes isn't display normally. i have included what I found at this link. [Link: 4shared.com]
it's a xls file. everything highlited in green has been tested to work.
- sony KDL-46V25L1
- Pioneer VSX-920K
- WDTV Live Hub Media Player (no discrete codes). from remote
- Motorola comcast set top box (no discrete codes). from remote

Last edited by tekstyle on March 21, 2012 16:35.