Your Universal Remote Control Center
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from


Device/command parameters needed (Sony TV KDL-46HX920)
This thread has 1 response. Displaying all posts.
Post 1 made on Sunday December 18, 2011 at 02:49
Lurking Member
December 2011
Good day,
I need device number and commands to perform direct input switch (hdmi1, hdmi2, etc)
I contacted Sony support team: they could not help me.

If you couldn't find codes for my tv, I'll be happy to get corresponding codes for any other Sony TV.

My sony's remote has button 'INPUT SELECT', and has no buttons to switch input directly. So I couldn't learn codes.
My universal remote device sends commands from PC using RS232. It works well with Sony protocols. I don't know how to find device/command parameters.

I tried brut force, but there are a lot of different combinations and there are no any back information from tv, expect TV's green LED.

My TV characteristics: LED, 3D, LAN support, etc.

OP | Post 2 made on Sunday December 18, 2011 at 03:51
Lurking Member
December 2011
Device codes and commands from your Sony library didn't worked with my tv

For example, there were no result after sending command 90 to device 26.

Jump to

Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse