I am working on a job with numerous Xantec RAT1 volume controls and my partner made off with the RC68+ programmer. I need a source of clean codes from multiple code groups. I have the default group 30 codes for the RAT1 but I can not find a complete list of RC68 commands.

Does anyone know a way to extract the codes from the Xantec library without having to put together a system to learn from?

OK, so after a bit of research it appears that the Xantec codes are NEC1 protocol and the different code groups are just different device codes (10=code group 30, 40=code group 4). The function code numbers seem to be the same for each device number.

As much as I would like to geek out over this I am wondering if someone has been through this already and can confirm or deny my assumptions.... and I am wondering if someone has a list of the code group-device number associations.

There are quite a few of the codes in the pronto files section.

CJ

So far I have found mostly the default codes for particular devices but not multiple code groups (i.e. particular codes for particular devices in multiple code groups

Is the information you are looking for this?

[Link: hifi-remote.com]

You Rock!

I can generate the clean codes now without having to pick apart each code group!!!

I have a excel sheet with the full RC68+ codes. All 55 code groups and all 55 buttons. Including the FF rane for programming.

Email me if you need them.

I could use that excel sheet if you would be so kind.. our RC68 has disappeared, and of course I need it like, thursday. Thanks.

Do you still have this spreadsheet? Any chance you could e-mail this to me? Would really appreciate it.

Thanks

e-mail address: [email protected]

Hi,

If you still have the excell spredshit it would be reallly helpfull.

My email is [email protected]

Thanks!