Post 1 made on Sunday December 12, 2004 at 20:35 |
clarkcarty Lurking Member |
Joined: Posts: | December 2004 4 |
|
|
OK,
From all of the other threads I've manages to get Input1-4 and InputPC working. Nobody has ever listed a command for InputTV. Anybody have it?
It's the last pice of the puzzle I need to get my Harmony 768 working. The input toggling method just stinks and doesn't work correctly half the time. The only one that works out of the box is InputPC.
Thanks,
Clark
This is what I can confirm works:
Input 1 (device 1, function 306) 0000 006d 0000 0020 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 001e 000a 0679 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 0046 000a 0679
Input 2 (device 1, function 307) 0000 006d 0000 0020 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 001e 000a 0679 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 0046 000a 0679
Here you go. Found that the sharp projector video 3 works on Aquos input 3. Enjoy 0000 006d 0000 0020 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 001e 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 001e 000a 0047 000a 001e 000a 066b 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 001e 000a 001e 000a 0047 000a 0047 000a 001e 000a 0047 000a 066b
Input 4 (device 1, function 467) 0000 006d 0000 0020 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 001e 000a 0046 000a 001e 000a 0046 000a 0046 000a 0046 000a 001e 000a 0679 000a 0046 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 001e 000a 0046 000a 0046 000a 001e 000a 0046 000a 001e 000a 001e 000a 001e 000a 0046 000a 0679
|
|
Post 2 made on Sunday December 12, 2004 at 23:34 |
jarmstrong Founding Member |
Joined: Posts: | March 2002 1,780 |
|
|
Clark, I posted a summary of all the command sets I had run across for the Sharp displays in post 28 of this thread: [Link: remotecentral.com]Your commands are: Sharp:01:050 Input 1 Sharp:01:051 Input 2 Sharp:13:052 Input 3 Sharp:01:211 Input 4
|
|
OP | Post 3 made on Monday December 13, 2004 at 12:38 |
clarkcarty Lurking Member |
Joined: Posts: | December 2004 4 |
|
|
I used the CH+ command for the InputTV command. There is, however an InputTV command listed in the RS232 section of the user's manual.
It's only a little annoying at powerup if it was left in TV mode versus another input. The channel will change after the powerup delay amount specified in the remote.
However when switching from any other input to the TV this works great.
Clark
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.