| Post 1 made on Thursday August 22, 2002 at 22:14 |
Chris Bayley Lurking Member |
Joined:
Posts: | August 2002
4 |
|
|
I wanted to use a IRS232 to provide 232 control to an NEC plasma, but seemed to have found that the IRS232 will not output hex codes above 7Eh, that is; it is limited to the lower 128 ASCII codes only - now it does say ASCII in the manual but does state it explicitly as a limitation and certainly Dragon Drop will allow any code to be setup.
I'm guessing that while ASCII 232 control may be predominant, there must still be many many devices that use binary/hex ?
What is the outlook for providing IR driven 232 for these devices ??
Regards,
Chris
|
|
| Post 2 made on Monday August 26, 2002 at 11:56 |
quest51459 Founding Member |
Joined:
Posts: | September 2001
197 |
|
|
Go to celedon.com, call them and order their rs232 to ir, they made it for us and it works great.
|
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
