Post 1 made on Thursday February 4, 2010 at 08:52 |
musictoo Active Member |
Joined: Posts: | January 2005 542 |
|
|
Anyone successfully controlling one of these with RS232?
|
|
Post 2 made on Thursday February 4, 2010 at 09:34 |
jberger Active Member |
Joined: Posts: | October 2006 643 |
|
|
The entire serial protocol is available from Speakercraft, if you are a dealer just call TS and request a copy via email.
|
|
Post 3 made on Thursday February 4, 2010 at 11:18 |
At least a hundred times...
|
|
|
Post 4 made on Thursday February 4, 2010 at 11:30 |
Homeboy Long Time Member |
Joined: Posts: | February 2004 216 |
|
|
Yes, works great, a very solid system indeed.
|
|
OP | Post 5 made on Thursday February 4, 2010 at 12:25 |
musictoo Active Member |
Joined: Posts: | January 2005 542 |
|
|
Having difficulty with RTI. Using their codes in the RS232 database with no luck.I've copied the strings generated from Speakercraft's emulator, and not having much luck there either. The emulator controls the chassis fine with a null cable. Obviously I'm messing things up on the control side.
|
|
OP | Post 6 made on Friday February 5, 2010 at 16:40 |
musictoo Active Member |
Joined: Posts: | January 2005 542 |
|
|
For those who may be interested... I was using a CM232 on one of the MPIO ports on a ZRP6. Looked at the output in a terminal window that showed HEX and the strings were not being sent correctly. Used the dedicated RS232 port on the ZRP6 and it worked fine.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.