Post 1 made on Tuesday June 25, 2013 at 02:49 |
tinsnow Long Time Member |
Joined: Posts: | February 2013 131 |
|
|
Current Setup: I have a MRF-260 and MRX-1 with antenna. Able to control both the base stations using MX-890 remote
Purchased an iphone app to control devices using iphone. Now when I complete the iphone setup process I assume I will be able to control the devices connected to MRX-1 using iphone.
How about devices connected to MRF-260? Does the MRF-1 take commands and send it to MRF-260/MRF-350 in RF format? Or do I need to buy another MRX-1 in the house to control devices at second place using iphone (I am worried about buying many MRX-1 since they are expensive)
- Basic question on if iphone can be used to control devices with non ip base station like mrf-260 or mrf-350. (Only having one ip base station in home like the mrx-1).
|
|
Post 2 made on Tuesday June 25, 2013 at 05:58 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,299 |
|
|
The mx-ios app will only control devices attached to the mrx1. (Also urc lighting if you have an rftx1 attached to port 6 of your mrx1)
|
|
|
OP | Post 3 made on Tuesday June 25, 2013 at 12:25 |
tinsnow Long Time Member |
Joined: Posts: | February 2013 131 |
|
|
So looks like the option is to keep two MRX-1 at both the places.
Does that also means, I have to keep ethernet at both the places? Logically yes but just in case you never know how technology can simplify lives.
|
|
Post 4 made on Tuesday June 25, 2013 at 12:36 |
Duct Tape Loyal Member |
Joined: Posts: | November 2008 5,299 |
|
|
yes, you need a network connection to both MRX1's. You will program your MX-iOS unlock code to one of the MRX1's.
|
|
|
OP | Post 5 made on Tuesday June 25, 2013 at 16:45 |
tinsnow Long Time Member |
Joined: Posts: | February 2013 131 |
|
|
Hi Duct Tape,
I see something called "MRX-4IR". Does that work for me? It looks like it takes commands wirelessly. (Use MRX-1 at main location and MRX-4IR at second location)
If it works, the second question is. Does it take commands from my MX-890 and not just the MRX-1.
|
|
Post 6 made on Tuesday June 25, 2013 at 18:01 |
JoeFlabitz Select Member |
Joined: Posts: | December 2008 1,517 |
|
|
The MRX-4IR can be used with iOS app, but it cannot see any RF from any MX remote. MRX-4IR has either a hardwire LAN connection or a WiFi connection. No RF antenna connection and no RFTX1 connection for URC lighting control.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.