Post 1 made on Monday January 25, 2010 at 20:56 |
kevinzk Lurking Member |
Joined: Posts: | January 2010 7 |
|
|
I have calibrated my system using an MX-450 Remote and I am trying to add a new 2nd TV in the control room to the remote as a new device. When I added the new device in the menu it works fine (power, volume, menu, etc.) in test mode. After I pass it, the device is unresponsive on the remote. I tried erasing the learned commands and the macro's on the device but it still doesn't work. Please help.
|
|
OP | Post 2 made on Tuesday January 26, 2010 at 12:08 |
kevinzk Lurking Member |
Joined: Posts: | January 2010 7 |
|
|
Remote IR signal turns off outside of test mode. Not enough IR signal to operate TV being emitted from the flasher on the MRF-350. Hooked up an extra IR Flasher to front of TV from one of the line outputs, turned the emitter up to near Max and bingo it works.
|
|
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our
Marketplace. For information on how to advertise your service or product
click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.