| Post 2 made on Friday February 11, 2005 at 13:32 |
johnsfine IR Expert |
Joined:
Posts: | September 2002
5,159 |
|
|
In Pronto Hex an NEC signal basically looks like:
900A 006D 0000 0001 stuv wxyz
where you replace stuv with the custom code and replace wx with the command code and replace yz with the computed value FF minus the command code.
So for example, your Input1 is:
900A 006D 0000 0001 00FF 09F6
| |
|
|
