On 09/18/05 21:34 ET, glendagary said...
Do you have the 4.1 or
4.2?
I have the HDS4 or HDS4.1 I guess they call it now. It only has the one component video output.
On 09/18/05 21:34 ET, glendagary said...
Do I need anything more
than the DVP-CX985V (CM1, CM2. CM3) + Pronto Signals
DVP-CX985V (CM1, CM2. CM3)?
You will need the devices listed above plus one. The Pronto Signals devices you listed do contain the IR code buttons for each changer, but are not linked to the DVD changer devices directly. My Pronto Signals (Bridge) device is. This device acts as a bridge between my individual IR code devices and the rest of my .pcf file. In any event, so long as you make sure the buttons on the setup page are linked accordingly under each DVD changer device you'll be set to go.
On 09/18/05 21:34 ET, glendagary said...
I was studying the best way to catalogue movies
into changers. I know you have inserted additional
titles in "empty" spaces over a period of time.
Since I am starting at the beginning (about 600
titles)....would you just alphabetize whole collection
by first letter in title and then install into
changers as 1-600 (actually 1-400; 1-200 so to
speak) in the All Titles category...and then go
back an make various genres after that?
Prior to loading my changers I had 885 DVD discs total. If you hit up my
DVD Profile and view my list by collection ID you will see that I did reorder my collection ID's by title prior to loading my changers initially. From that point forward I have not reordered my collection ID's in DVD Profiler. With each new DVD I've purchased since, I just add the individual disc or discs to my DVD Profile individually allowing DVD Profiler to assign the next collection ID available. That collection ID in turn matches the next available slot in my DVD changer. Done deal.
This message was edited by Lowpro on 09/19/05 01:58 ET.
