On 06/09/02 20:13.15, kabster said...
Is the HD monitor out on ?
Yes
Isn't it just a pass through on the 15 pin ?
The point of my post is Pioneer won't converge HD through VGA it has to converged with component feed.
if you have a hum check you video leads for miss
wires.
I believe the hum was from the pot not adjusted correctly.
If you lift the ground does it go away ? If so
you have a ground loop.
Not a hum through the speakers but an actual hum in the TV do to I what I believe to be a mismatch not having the pot adjusted correctly.
I sent it back and was advised after the fact of the pot. Even tech support at Key Digital never mentioned that instead they were more interested in selling me a new unit.
