On December 21, 2005 at 22:23, cb1 said...
Take the print out and reduce it to a 3x8 size,
the feed it through the top of the 3100,
just above the IR transmitter, the 3100 will read
the codes and save them on an unused component
page on the 3100, press other twice and look
for the label
"Magic codes"
my 2
cb1
Nice try, cb1. You made me go look at my 3100, but it must be the older model because there is no slot. Should I order a new one.
It's not April 1st again, is it?
