| Post 2 made on Saturday July 8, 2023 at 13:24 |
Brad Humphrey Super Member |
Joined:
Posts: | February 2004
2,603 |
|
|
The Samsung protocol uses 37.9 KHz carrier frequency.
I would suspect the problem has something to do with the carrier frequency. As in the carrier frequency is getting stripped off and your device is transmitting the base band signal without the carrier, which means the AC unit can't read it.
Not familiar with that system but you would need to dig into information about setting the IR carrier frequency, to see if that is the issue.
| |
|
|
