I just had two (87504-267 secure view) liftmaster garage doors installed and previously integrated using two wires for sensing and two wires for open/close. I also used the Security+ 2.0 Wired Dry Contact Adapter from Garadget but recently the doors will not close all the way when using the remote. Sometimes it stops midway and then goes back up. I've checked the sensors at the bottom of the doors because this usually is the issue but nothing has changed. I use Control4; I ended up removing the contacts entirely and not having it controlled by Control4 but with the Garadget device connected, it still randomly stops closing and goes back up. Anyone else experience this?