On October 17, 2017 at 14:43, borgon said...
IR CODES / NEC Protocol
Description Value
0 0x37CA, 0x00FF
1 0x37CA, 0x01FE
2 0x37CA, 0x02FD
3 0x37CA, 0x03FC
4 0x37CA, 0x04FB
5 0x37CA, 0x05FA
6 0x37CA, 0x06F9
7 0x37CA, 0x07F8
8 0x37CA, 0x08F7
9 0x37CA, 0x09F6
Audio 0x37CA, 0x0AF5
Setup 0x37CA, 0x0BF4
Power Togle 0x37CA, 0x0CF3
Power On 0x37CA 0x807F
Power Off 0x37CA 0x817E
Info 0x37CA, 0x0DF2
Previous 0x37CA, 0x0EF1
Play_Pause 0x37CA, 0x0FF0
Next 0x37CA, 0x10EF
Up 0x37CA, 0x11EE
Left 0x37CA, 0x12ED
OK 0x37CA, 0x13EC
Right 0x37CA, 0x14EB
Down 0x37CA, 0x15EA
Back 0x37CA, 0x16E9
Menu 0x37CA, 0x17E8
SRC 0x37CA, 0x18E7
Vol+ 0x37CA, 0x19E6
SRC+ 0x37CA, 0x1AE5
Vol- 0x37CA, 0x1BE4
Mute 0x37CA, 0x1CE3
SRC- 0x37CA, 0x1DE2
Hi there,
owning a Lyngdorf-Device for a week now I ran into the same problems as Borgon - I do not succeed in transforming the NEC1 codes provided by the vendor into Pronto Hex codes.
I studied this thread a couple of times by now and though on page three it seems there has been a solution / success in transforming these codes I simply don't get it.
So if anyone would be so kind and support me with a list of these commands working for a Pronto TSU9400 I'd be really happy.
By the way: The codes provided in
this post do
not work
Thanks in advance & kind regards,
Marcel
