Your Universal Remote Control Center
General Consumer Remotes Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 1 made on Wednesday October 7, 2020 at 09:14
Junior Member
October 2020
I have a (Spectrum/Charter issued) 1060BC3 remote and a Sony X900H (XBR Bravia) TV. Using code 10810 works (mostly) but the Select/OK button does not work. Have tried various 5 digit EFC codes (via 994 programming) but can't find the right one. Any suggestions?


Edit #1 -- I now have Select/OK working on the 1060BC3 remote by using EFC code 14149. See the 994 procedure below.

As a side note I find it interesting that 14149 mod 256 = 00069, but 00069 does not work.

Edit #2 -- Another missing button on the 1060BC3 remote (relative to the Sony X900H issued remote) is the Settings/Gear-icon button. For this I substituted the unused/unassigned (when configured as 10810) Guide button on the 1060BC3 remote, and used EFC code 24876 (aka Tools) and this is now working correctly as the Settings/Gear-icon button.

Last edited by billstei on October 8, 2020 13:44.

Hosting Services by ipHouse