Your Universal Remote Control Center
RemoteCentral.com
Philips Pronto NG Family Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 11 made on Tuesday August 18, 2020 at 12:26
Stoobie
Long Time Member
Joined:
Posts:
April 2004
362
Did the user manual have the information on setting the DIP switches on th base of the blaster? Set them to the highest level (3) to see if that works. You can temporarily turn off the main blaster to sest in the emitters work.

How to Turn Off the IR Blaster
When you decide to control the audio/video devices with Dual IR emitters only,
you can turn off the IR blaster of the Blaster unit.

To turn off the IR blaster, set switch 5 to 0 (Off).

How to Set the Dual IR Emitter Power Levels
You can use dip switches 1 to 4 to set the power level of the Dual IR emitters.
Toset the power level:

For Dual IR emitters 1 and 2, use switches 1 and 2;

For Dual IR emitters 3 and 4, use switches 3 and 4.

You can choose between 4 power levels (0, 1, 2 and 3). By default, power
level 3 is selected for each group of Dual IR emitters

I hope that assists

Stoobie
RC9500, RC5400, RU940 & Pronto Neo, Windows Vista.


Hosting Services by ipHouse