Post 2 made on Monday February 1, 2016 at 17:46 |
mdavej Active Member |
Joined: Posts: | December 2002 627 |
|
|
Do you have any universal remotes? Depending on what type, you could try all 64 possible commands and discover the new/moved commands in about 5 minutes. If your universal takes pronto hex, use IRScrutinizer to generate all the commands using Dish Network protocol, D 0, S 0, F 0..63, export format text. It will save you some time if you only try the as yet unused OBCs (F codes): 17, 21, 25, 29, 40, 42-44, 46, 48, 51, 62
The original # (search) was 38.
If you have a JP1 remote, these can be tested very easily without programming. Setup the remote for Dish (setup code CBL 0775 or 00775), then tap Setup then each of the following. The command is sent when the last digit is pressed. If none of the commands do anything, then IR codes for them do not exist.
00240 00112 00241 00113 00015 00079 00047 00143 00207 00012 00044 00205
|
|
|