| Post 4 made on Saturday August 22, 2015 at 04:49 |
red2k Lurking Member |
Joined:
Posts: | August 2015
6 |
|
|
On January 18, 2013 at 01:25, 3FG said...
You can do this yourself, with a little bit of work. Go to [Link: awe-europe.com] and download e.g. VSX922-IR, which is the fiscal year 2013 (starts March 2012 in Japan) data. This spreadsheet has all 4 Modes, but not in Pronto Hex format. Next download IRMaster (download setup.exe if you're using Windows), install it, and use it to render the Pioneer codes into Pronto Hex. You'll need to add an entry to IrpProtocols.ini: [protocol]
name=Pioneer2Cmd
irp={40k,564}<1,-1|1,-3>(16,-8,D:8,~D:8,S:8,~S:8,1,^108m,16,-8,F:8,~F:8,E:8,~E:8,1,^108m)+ [D:0..255,S:0..255,F:0..255,E:0..255]Then start IrMaster, select Pioneer2Cmd, and enter the Pioneer data. For example, HDMI 1 for Mode 2 is listed as A59A+AF27. In IrMaster, enter 0xA5 into D, 0x9A into S, 0xAF into F, and in Additional Parameters, enter E=0x27. Click Generate, and it should display 0000 0068 0000 0044 0169 00B4 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0636 0169 00B4 0017 0044 0017 0044 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0017 0017 0017 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0044 0017 0636 To check the Pronto Hex, click decode, and it should show the decode in decimal rather than hexadecimal notation. protocol = Pioneer, device = 165, obc = 154 protocol = Pioneer, device = 175, obc = 39 Oh damn, I really need those mode 2 codes and the link is down, I don't even think they exist anywhere, I have searched high and low on the net for the extra codes as I also need them. I have two Pioneer AVR's side by side and one is too old to support the second remote feature unfortunately and the newer one can do the different codes but I need the newer one on mode 1 which conflicts with the older AVR. I need the newer AVR on mode 2 and I need the discrete codes for my harmony for HDMI-AMP and HDMI-THROUGH and also MCACC 1 to 6 and they only come as mode 1 :( Pioneer/Logitech should have made those buttons available for direct use, and also the subwoofer on/plus/off too, that was a huge over-site. Anyways, my older AVR is a VSX-9130TXH and my newer one is an SC-1527-k (SC-65 basically). If anyone can help me get the mode 2 codes or possibly has a link to some kind of database or file with simply more mode 2 codes for pioneer receivers I can sift through that would be so helpful and I would be eternally grateful :) Oh and sorry for posting on such an old thread, but this is the ONLY one that has ANY kind of mention about the mode 2 hex codes on the net that I can find so far. Thank you for your time everyone ;)
| |
|
|
