I have all the commands working except the discrete on. There was a thread about this in the CI forum a couple years ago but the solution was never posted.

I'm using a MX-3000 and MSC-400 with the hex codes from the AA website. Latest firmware on the AA BB (2.06) and its powered with an AC adapter and connected to PS3 with the through USB for power sensing. The Power sensing and discrete power on are selected in the AA software which was downloaded to the Bluebeam.

Everything works like a charm except the power on. The BB LED does not blink when it receives the power on command (when the PS3 is off) which indicates its not receiving the signal. However, when the PS3 is powered on, the Bluebeam does respond to the discrete on command (nothing happens since its already on but it does respond through the LED).

I tried the hex string from the old CI thread and the AA website. The ir flasher mounted to the front of the BB is firing.

Thanks in advance.