| Post 3 made on Friday January 18, 2013 at 01:25 |
3FG Select Member |
Joined:
Posts: | August 2009
1,861 |
|
|
You can do this yourself, with a little bit of work. Go to [Link: awe-europe.com]; and download e.g. VSX922-IR, which is the fiscal year 2013 (starts March 2012 in Japan) data. This spreadsheet has all 4 Modes, but not in Pronto Hex format. Next download IRMaster (download setup.exe if you're using Windows), install it, and use it to render the Pioneer codes into Pronto Hex. You'll need to add an entry to IrpProtocols.ini: [protocol]
name=Pioneer2Cmd
irp={40k,564}<1,-1|1,-3>(16,-8,D:8,~D:8,S:8,~S:8,1,^108m,16,-8,F:8,~F:8,E:8,~E:8,1,^108m)+ [D:0..255,S:0..255,F:0..255,E:0..255]Then start IrMaster, select Pioneer2Cmd, and enter the Pioneer data. For example, HDMI 1 for Mode 2 is listed as A59A+AF27. In IrMaster, enter 0xA5 into D, 0x9A into S, 0xAF into F, and in Additional Parameters, enter E=0x27. Click Generate, and it should display 0000 0068 0000 0044 0169 00B4 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0636 0169 00B4 0017 0044 0017 0044 0017 0044 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0017 0017 0017 0017 0017 0017 0044 0017 0017 0017 0044 0017 0017 0017 0044 0017 0044 0017 0044 0017 0017 0017 0017 0017 0044 0017 0017 0017 0017 0017 0017 0017 0017 0017 0017 0017 0044 0017 0044 0017 0017 0017 0044 0017 0044 0017 0636 To check the Pronto Hex, click decode, and it should show the decode in decimal rather than hexadecimal notation. protocol = Pioneer, device = 165, obc = 154 protocol = Pioneer, device = 175, obc = 39
| |
|
|
