Your Universal Remote Control Center
Philips Pronto Remote Control File Area
Up level
Up level
The following page was printed from

Before you continue!

This file area has been replaced with a newer one!
As of 2011, this section is no longer being updated, and some files may show as unavailable. For free access to all of these downloads and many newer ones, visit our NEW file area at:

You are currently browsing through the Philips Pronto & ProntoPRO, Marantz RC5000, RC5200 & RC9200, Onkyo CHAD and Yamaha RAV-2000 file area. To return to the beginning click here.

 Files > Pronto > Other > Utilities > IR Programs
22 files under IR Programs
Displaying files 1 through 10 on page 1 of 3.
[ < Back | Next > ]
Page: 1 2 3 ]
Sort by: [ Title | Date | Author ]
Bose IR Code Generator
For: All Models
By: Anonymous
Excel-based IR Hex code generator for use with the Pronto, as provided by Bose for the V30 system.
Updated: December 30, 2009  Size: 59kb
IR Tool Modified
For: All Models
By: Dan Arnold
IR Tool originally written by Glenn Clapp and modified by Dan Arnold to work with John Fine's DecodeIR.DLL. A dialog box pops up with Protocol, Device, OBC and EFC. Once that box is closed the original code will decode the same hex file. Given that DecodeIR is much more current any conflicting information with the dialog box should be ignored. Requires the DecodeIR.DLL file, available separately.
Updated: June 15, 2003  Size: 18kb
Sony SIRC Code Generator
For: All Models
By: Espen Burud
v1.0 This program is an application which can be used to generate Sony SIRC Codes for use in Philips Pronto remote controls. The application is built for .NET Framework 3.5, so it's required. Feedback, improvement and enhancement suggestions can be sent to my email address.
Updated: June 01, 2009  Size: 41kb
IR Tool
For: All Models
By: Robert Collins
v1.3 IRTool v1.3 is the original IRTool by Glenn Clapp and modified to also encode/decode Xantech IR-X10 IR commands. The entire Xantech IR-X10 command set can be decoded and encoded by this version of the tool.
Updated: January 19, 2006  Size: 85kb
For: All Models
By: Manuel Duarte
A utility to store your own IR codes in the ProntoEdit database. (Beta 0.9, Build 2)
Updated: June 29, 1999  Size: 886kb
For: All Models
By: John Fine
Decodes all learned infrared codes in a CCF file and gives you information on the protocol, device number, command number, and so on. Requires the DecodeIR.DLL file, available separately.
Updated: January 03, 2007  Size: 39kb
For: All Models
By: John Fine
File required by DecodeCCF and IR Tool Modified.
Updated: December 08, 2007  Size: 94kb
For: All Models
By: John Fine
v5.0 Makes clean IR sequences from IR protocol files. See the readme file for more information.
Updated: January 03, 2008  Size: 55kb
ProntoUtil Mod
For: All Models
By: Wayne Fox
Modified v1.2 This version optionally writes out a .CSF file of all the codes generated for a device code.
Updated: July 08, 2002  Size: 164kb
For: All Models
By: Peter Ghosh
USB-UIRTJ is a Java application written for the USB-Universal Infrared Transmitter Reciever built by Jon Rhees ( The application will read the output file generated by MakeHex or ProntoUtil and cycle through the codes to allow the user to find a particular code. This project is posted at sourceforge at
Updated: June 05, 2005  Size: 79kb
More IR Programs: [ < Back | Next > ]
Return to the Programs, Utilities & Documentation index.

Share with the remote control community
by uploading a file to Remote Central!

Hosting Services by ipHouse