|
|
|
The following page was printed from RemoteCentral.com:
problems with macros changing device...
| |
|
Topic: | problems with macros changing device with Mitsu This thread has 34 replies. Displaying posts 1 through 15. |
|
Post 1 made on Sunday December 15, 2002 at 03:03 |
heynurse Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
I have a Mitsubishi wide screen with Netcommand and I just got the MX-500 and love it so far. I am trying to set up a few macros and everything seems to be working just fine, except one thing.
The Netcommand feature on the tv, allows you to custom setup "devices" which you program and set up each component you want to use. For example, my "devices" are DT-Antenna, DVD, VCR, Sat, and all the inputs as well.
Anyways, I am trying to set up a few macros so my wife can just hit a button and have the macro set everyting up to put in a DVD, or another button, to watch a VHS, or TV etc....
I can get the macro to do everyhting, except program the "device" in the tv to the correct "device". does anyone have any suggestions or solutions? Thanks in advance.
my setup: mitsu 55711 with OTA HD reciever Yamaha 5 dvd player HD hughes sat reciever VHS and a Denon 3803 AVR
This message was edited by heynurse on 12/15/02 03:10.51.
|
|
Post 2 made on Sunday December 15, 2002 at 10:24 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
I believe the following procedure still works with the newer Mits as it did the older ones. This will convert your Mits remote into a discrete mode that should give you the input switches you're looking for: Set the Slide Switch at the top of the Mitsubishi Remote to TV. Press and hold the POWER button, and while holding the power button enter 090.
Now the remote functions like this:
Power = Power On Only Stop = Power Off Only Pause = AV Reset
Pressing DEVICE followed by: PIP = DTV (HD Input) 1 = Input 1 2 = Input 2 3 = Input 3 4 = Input 4 5 = DVD / Component 1 6 = Component 2 SQV = Input STB, Input 5 or DVI (depending on model) QV = Input VGA PIP CH Up = Antenna A PIP CH Down = Antenna B SQV = Front SVideo QV = VGA PIP/POP = OTA HD Antenna (Built-In HD Tuner)
Learn the desired commands to your MX-500. When done, press and hold POWER button and enter code 000 (935 with NetCommand models) on your Mits remote to return to its normal functioning mode.
For older model Mits, use the "Input" key instead of "Device".Mike www.surfremotecontrol.comThis message was edited by MikeSRC on 03/20/04 18:44.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 3 made on Sunday December 15, 2002 at 11:19 |
aztriker Long Time Member |
Joined: Posts: | September 2002 117 |
|
|
Yes this works great. I just did this procedure with my new Mits 55909. I might add two things. First, be sure and push the "Device" button before each entry. However, don't worry about using a "Device" button on the MX-500. Once you push it on the Mits remote, just learn the next key stroke to your MX-500.
|
|
OP | Post 4 made on Sunday December 15, 2002 at 12:06 |
heynurse Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
Great, Thanks for all the info, I'll give it a try latter today and let you all know how it goes. You guys rock and so does this site :)
|
|
OP | Post 5 made on Sunday December 15, 2002 at 14:32 |
heynurse Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
MikeSRC,
It worked great, thanks again for the info!
|
|
OP | Post 6 made on Wednesday December 18, 2002 at 02:05 |
heynurse Lurking Member |
Joined: Posts: | December 2002 7 |
|
|
MikeSRC or anyone else,
I did run into one problem. Do you by chance know where I can get a discrete code for the high resolution input for the DTV component input? I have my HD sat receiver in that input and need the discrete code for it.
Thanks
This message was edited by heynurse on 12/18/02 02:11.53.
|
|
Post 7 made on Wednesday December 18, 2002 at 09:16 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
It should be: DEVICE, followed by PIP, in the list above.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 8 made on Saturday February 8, 2003 at 22:59 |
ednigma Lurking Member |
Joined: Posts: | February 2003 1 |
|
|
MikeSRC,
Does this work for the the earlier 46807 series? Is the DEVICE key the same as the INPUT key on my remote? If it is, do I press up or down arrow?
Thanks, Ed
|
|
Post 9 made on Saturday February 8, 2003 at 23:16 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
Yes, it does. Use INPUT UP.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 10 made on Saturday March 1, 2003 at 16:38 |
ddarche Mr. RemoteQuest |
Joined: Posts: | February 2002 2,309 |
|
|
HI MikeSRC - Has anyone seen a discrete for Input 5 on Mit? My WS-65909 has Input 5 in the front of the tv.
Thx - Dave
|
Dave D'Arche http://RemoteQuest.comFine Home Theater Remote Controls & Solutions - Programming services for most remotes |
|
Post 11 made on Saturday March 1, 2003 at 17:12 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
Try the SQV button in the procedure above.
SQV = Input STB or Input 5 (depending on model)
I've edited it to bring it up to date.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 12 made on Sunday July 27, 2003 at 14:15 |
Are there discrete codes to go directly to a screen format? (Normal, expand, stretched, etc.)
Thanks!
Eli
|
|
Post 13 made on Sunday July 27, 2003 at 15:00 |
MikeSRC Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
|
Post 14 made on Tuesday November 11, 2003 at 19:30 |
Bryan Guidizi Lurking Member |
Joined: Posts: | November 2003 5 |
|
|
I know this is an old post, but thought I would update it for the new 2004 Model Mits Gold WS65513
Power = Power On Only Stop = Power Off Only Pause = AV Reset (I did not verify this)
Pressing DEVICE followed by: PIP/POP = ANT-DTV PIP DEVICE = INP-DTV PIP Device = Input DTV 1 = Input 1 2 = Input 2 3 = Input 3 - Front of TV inputs 4 = Input 4 - No input 4 on this TV 5 = Component 1 6 = Component 2 SQV = Monolink DVI QV = Input VGA PIP CH Up = Antenna A PIP CH Down = Antenna B
|
|
Post 15 made on Monday February 16, 2004 at 23:53 |
rosen999 Lurking Member |
Joined: Posts: | January 2004 2 |
|
|
That it is where I started, It helped with all the other, but the component discrete code 5 or 6 still do not work. Any other ideas?
Thanks
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|