|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | SAMSUNG CODES This thread has 173 replies. Displaying posts 106 through 120. |
|
| Post 106 made on Monday February 11, 2008 at 17:07 |
sensei73 Lurking Member |
Joined:
Posts: | February 2008
3 |
|
|
Hello please, i bought a logitech Harmony 525 and I'm looking for Hex code for discrete coommand like inputs and power on/off( i want to convert it to ccf to send it to logiteck). My TV is a samsung sp-46l3hx (it's a DLP), i tried every a lot of discrete code but non worked for input or power on/off. Thanks in advance
|
|
| Post 107 made on Monday February 11, 2008 at 17:52 |
makitamark Advanced Member |
Joined:
Posts: | April 2004
984 |
|
|
hey MP4307, what remote are you using?
if it's a pronto then maybe you could extend the duration of a tv volume down command to say 4 seconds and include this single command after a page asking if you require surround sound or tv sound. once you select 'surround' the extended command is issued and the tv volume is ramped down to zero.
|
|
| Post 108 made on Monday February 11, 2008 at 20:46 |
tgrugett Select Member |
Joined:
Posts: | August 2004
1,850 |
|
|
On February 11, 2008 at 17:07, sensei73 said...
Hello please, i bought a logitech Harmony 525 and I'm
looking for Hex code for discrete coommand like inputs
and power on/off( i want to convert it to ccf to send
it to logiteck). My TV is a samsung sp-46l3hx (it's a
DLP), i tried every a lot of discrete code but non worked
for input or power on/off. Thanks in advance All know Samsung codes are contained earlier in this thread.
|
|
|
| Post 109 made on Tuesday February 12, 2008 at 09:40 |
MP4307 Long Time Member |
Joined:
Posts: | January 2008
25 |
|
|
Hi I'm using the mx-350, so what I've been doing is toggling the volume down button let say from level 17 on the tv to zero, that takes a bit of time. I was hoping to just mute, or I guess I could go through the menu option I disengage the tv speaker. But then reactivate when the wife uses the tv speakers. Also the other big one is the discreet for ant 1. Here when I'm watching dvd which is hdmi 1, then I switch to dvr 1 which is ant 1, it goes to air 1 or ant 2. I want it to just go to ant 2.
thanks,
|
|
| Post 110 made on Thursday February 21, 2008 at 10:13 |
AgentNappi007 Lurking Member |
Joined:
Posts: | February 2008
1 |
|
|
On June 27, 2007 at 17:26, mynab said...
Hello,
these codes seem to work fine for my LE40M86 (european
version). How did you get them? I would like to have the
code to switch to DTV mode.
Thanks! Hey mynab Just saw that you are looking for the same code I´m looking for as well. All the DTV mode codes I checked out from this posts here are only switching to the internal tuner for terrisic TV but not to the build in DVB-T tuner input. Did you have success in the meantime figuring out the right code for that. It is the only one remaining on my whislist for my LE-40F86BD discrete codes. Count on you man ;-) If you have it, please post it here. Thanks in advance AgentNappi007
|
Philips Pronto RU980 |
|
| Post 111 made on Thursday February 21, 2008 at 12:14 |
MP4307 Long Time Member |
Joined:
Posts: | January 2008
25 |
|
|
Hi I'm using an mx-350. I toggle volume down on the macro 15 to 16 times but it extends the macro execution time. also ant 2 is the other big issue.
|
|
| Post 112 made on Monday March 10, 2008 at 21:18 |
norcold1 Lurking Member |
Joined:
Posts: | November 2004
3 |
|
|
Does anyone have the discretes for "Just Scan" , "Wide Fit: Move" and Screen Burn Protection? My tv is HP-T5054 remote is BN59-00599A
Last edited by norcold1
on March 10, 2008 22:30.
|
|
| Post 113 made on Friday March 14, 2008 at 18:41 |
All the DTV mode codes I checked out from this posts here
are only switching to
the internal tuner for terrisic TV but not to the build
in DVB-T tuner input.
Did you have success in the meantime figuring out the
right code for that. Hi, I have just set up my remote using the codes below. It works on my LA40M81BD LCD but most Samsungs have similar codes. Give it a try. select digital tv EFC 171 OBC 67 HEX 3D
|
|
| Post 114 made on Tuesday March 18, 2008 at 23:04 |
Hi, I have a Sony RM-AV3100 remote, which was formerly programmed using discrete codes for the inputs of a different TV. I recently upgraded to a Samsung LNT5265 TV and would like to get back to discrete inputs. It has been a few years, but I recall using an inexpensive radio shack remote to accept the discrete codes and then using that remote to train my AV3100. Does this sound right? Is there a tutorial available on this process anywhere?
Also, which set of discrete codes should I using for this model TV? (LCD)
Lastly, that cheap radio shack remote may have gotten lost in my recent move, so If someone could suggest a replacement, that would help too.
Thanks in advance
|
|
| Post 115 made on Saturday March 22, 2008 at 05:58 |
Hi, do you know the code for "just scan" 1:1 function for LE52F96BD?
Thanks
Massimo
|
|
| Post 116 made on Tuesday April 1, 2008 at 00:43 |
FYI - I have a fairly new Samsung LA52M81BDX (52" LCD full HD) and the NECx2 codes from this thread worked for me on my URC MX-810 remote.. so I thought i'd post incase people with LAXXM81 model LCD's are looking for confirmation that these codes work..
So far only tested:
On
Off
DTV (actually toggles between DTV and AnalogTV)
TV (discrete, not sure why the DTV above isn't discrete though)
HDMI1
VGA1
Component1
S-Video1
Haven't tested the others but I'm guessing most will work since all these did..
So thanks all for the codes! :-) :-)
|
|
| Post 117 made on Monday April 21, 2008 at 22:26 |
On December 1, 2005 at 18:55, PHSJason said...
Yes, they keep changing the codes. Sometimes a lot, sometimes
most of the codes work, but others do not. Sometimes,
all the codes are the same.
Which model do you have? Remote --- RC-570M Samsung HD -- TXR 3079WH / 32" HD if that helps??? Mahalo, Ted
|
|
| Post 118 made on Thursday July 10, 2008 at 09:58 |
steveklein Long Time Member |
|
|
I have a Samsung LN-T4061 and none of the discreted input codes have worked for me.
I have to switch by source when I'd rather be able to go directly to HDMI 1, or PC. Anyone got discrete input codes ?
|
|
| Post 119 made on Sunday July 13, 2008 at 23:28 |
Groovit Long Time Member |
Joined:
Posts: | February 2008
269 |
|
|
On July 10, 2008 at 09:58, steveklein said...
I have a Samsung LN-T4061 and none of the discreted input
codes have worked for me.
I have to switch by source when I'd rather be able to
go directly to HDMI 1, or PC. Anyone got discrete input
codes ? I would never say anything absolute but most of the LNT models have responded to the NECx2 codes that have been posted here by PHS Jason and by myself in another thread. Most people end up not searching the posts thoroughly (especially this one because of the length) and miss the conversation about the NEC2 vs NECx2 code sets.
|
|
|
| OP | Post 120 made on Wednesday July 23, 2008 at 20:08 |
PHSJason Advanced Member |
Joined:
Posts: | December 2002
994 |
|
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
