All,


Can anyone confirm if the PPM42S3 is capable of using discretes? I spent over an hour on the phone with tech support without getting a resolution to my question.

Thanks everyone!

Matt

Sean,

I'm trying to get my OneForAll universal remote to do some discrete functions
on my new Samsung LNT 4671F. Thought you might be willing to help me do this.

I have the RemoteControlProgrammer software and JP1 cable that is supposed to let me convert the Pronto codes and download to the OFA. I did this once several
years ago, so probably all I need is a few pointers.

Thanks

Ed

Sean,

From your profile I notice that you have an MX-500. Can you tell me if,
on affirmitive, how you transferred these codes to the MX-500? I have
an MX-500 that I'm trying to mkae work with my new SamsLN-T4671F.

Actually, I'd appreciate it if ANYONE could tell me how to get these codes
over to my MX-500. Or, for that matter, to my One-For-All through the JP1
port.

Thanks in advance for any help or comment.

Ed

hi, do you happen to have the on and off codes for the samsung LNT-5271FX TV AND SAMSUNG SMT-H3050 CABLE BOX?
also looking for on and off codes for the dvd player RCA DRC257N.
Your help would be much appreiated.

Did you try the codes posted in this thread?

There is also another Samsung code thread. Search for "x-post" and Samsung.

i did try it... hmm... th on works but cant get the right off codes :( i'll look where you suggested. im a little new at this stuff

On a new FPT5884 plasma, the HDMI 1 input from the RTI database goes right to that input. If pressed again, or if the macro runs again when it is already on that input, it goes to the tuner. From any other input, bingo it hits HDMI 1. Repeat it and to tuner it goes. Any possible explanation?

Which file in the database?

If you post the specific code I will do a comparison with what I have in my excel sheet documentation of the clean codes to see what may be going on.

That's interesting because I have the same TV and I didn't notice this? I want to find a way to get to source-tuner and have not found a way. Maybe a macro of just repeating an input twice. If what you say is right than my macro's will screw up, maybe. If I set a macro to power-on, source-HDMI-1, pre/pro on and etc. it could if the set is already on HDMI 1 end up on the tuner.

I need to get the descreet code for source-tuner, anyone seen this?

Just a thought about your problem. If you have an input that does not get used maybe you could include that in your macro. I.e. if you don't use PC than you could macro to PC followed by the input of your choice and since the TV will never be on PC than it would always work. Same thing could be used if you wanted the tuner. With a macro you'd use the PC code twice and no matter where you are you'd end up on tuner.

On the other hand I hope this doesn't work with my TV because I sold this to the family saying it would be easy to just press one button and the entire system would be ready, put in a disk into the open tray and press play, easy. Two buttons and you're watching a movie. If they press that button and end up with sponge bob on the tuner I'm in deep do-do.

john

do you happen to have the the input codes for hdmi 1,2,3 ? i have to use the source button to contantly change the inputs.... pffff :(

thank you jason, i cant get the codes to work for all 3 hdmi inputs. i had to add a source button to each of the pages (1 for the blu-ray player, 1 for the cable box, 1 for the other dvd player) so i could toggle threw the inputs... isnt there an easier way? i would appreciate your help. the tv i have is SAMSUNG LNT-5271FX.
if you could email me that would br great. [email protected]
thanks, Cheryl :)

I experimented with my TV and the only input that toggles the tuner is HDMI 1. I seem to have a second HDMI 1 code also and that doesn't change from HDMI 1 to tuner. None of the other source codes go to tuner no matter how many times you press.

I have codes in my IR Data file for the descrete codes for the TV but I have no idea how to share them and I have no idea how to use the codes posted on this site. This is all new to me. The file number 464 on the URC Data base is what I used and it must be new because it's the last file of the data base and I just downloaded the newest database to get it. I also read that our TV has had a firmware upgrade and the codes were changed or codes were added, not sure.

BTW, I have buttons for all three HDMI input buttons, PC and every other source but I didn't download them to the remote and try them since I only use one of the three HDMI inputs on the TV. Maybe I'll give it a try and see what happens.

I'd really love to find an IR code for the tuner.

John

Did you try the discrete codes from the list documenting NECx2 device7.7 codes from earlier in this thread or from the thread below?:
[Link: remotecentral.com]

The function numbers are...

233 HDMI1
190 HDMI2
194 HDMI3

There is also an HDMI toggle command

Jason

I need discrete codes for my new Samsung 32 inc Lcd. I'm looking for ant1 and mute.
It's an Lns3215 I believe, and how do convert hex to usable code, using an mx-350.


Thanks,

G'day, I have a Samsung PS58P91FDX, none of the HDMI discrete codes are working for me, in the pronto database for the Samsung Flat TV single HDMI it has hdmi, HDMI1, HDMI2. hdmi works for HDMI 1 but none of the others work. All other functions from the database work for my panel. I have added a few code which didnt appear they all seem to end in 0707.
How do you see the actual code in the pronto database? all the codes just say "Database Code"
Thankyou