Way to technical for me. I don't have a clue how to get that code converted and into my Pronto...

Hi Guys,
I love your efforts on this. But.... You are always talking about HLPxxxx Models. I live in Germany and there aren´t such Modeldefinitions. Mine is a LE-32R32B, how does this translate into your models? I cant find any references so far.

Regards

Holger

...can not tell you, however, the primary Samsung code threads I refered to in an earlier post describe the use of two similiar but slightly different protocols (NEC2 and NECx2) for which there are MANY codes listed within the threads.

Do a search, cut-n-paste as needed and test for your set. The only way we know the information we do is because we have spent countless hours testing and observing with the gear we come in contact with. You will likely have to do the same.

Edit... sorry, my references were in a different post in a different thread... try these:
[Link: remotecentral.com]

[Link: remotecentral.com]

Thank You. Will read through it tommorrow. I fear the same, I will have to test them all. When done I will leave a post, so we may list one more set suitable for these codes.

Don't test them all.

There are two basic code sets that work with most samsung TVs (NEC2 and NECx2).

The SAMSUNG CODES thread starts with listings for NEC2 codes which, despite the different model listings are just duplicates from model to model. later in the thread and in the other thread, the NECx2 codes are documented.

Start with just a code or two from each set (NEC2 and NECx2). If codes from one set work for you (try power on, off, toggle or inputs) then you can proceed with testing of more codes from within that set.