 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Toshiba HD DVD codes This thread has 36 replies. Displaying posts 16 through 30. |
|
| Post 16 made on Tuesday April 17, 2007 at 21:20 |
waffles Long Time Member |
Joined:
Posts: | April 2007
24 |
|
|
I have been unsuccessful to get those codes above to work. I am trying to get those into my URC MX-3000. I tried the ProntoEdit as well as the Universal Browser HEX route - no joy so far.
I am particular interested in the discrete OFF for the XA-2. Could anybody email me his/her either ccf file or better the rcc file? I could not find anything in the forum's file section.
BTW, galileo01's post #9 seems to have identical codes for ON and OFF. Can this be?
Thanks much!!
|
|
| Post 17 made on Tuesday April 17, 2007 at 22:38 |
pesci Senior Member |
Joined:
Posts: | August 2006
1,211 |
|
|
Hey guys, what abpout the HD A2???? Dont know if these hex codes work, i pasted into library and will try, but what about the discrete on and off, anyody hav e them?? I tried the play stop thing but didnt work, play doesnt even turn the dvd player on..
|
|
|
| Post 18 made on Wednesday April 18, 2007 at 08:44 |
cjoneill Select Member |
Joined:
Posts: | December 2002
2,174 |
|
|
I have the A2 codes at home. If you haven't gotten it by the time I get home this evening, I'll email them to you.
CJ
|
I'm not a pro |
|
| Post 19 made on Wednesday April 18, 2007 at 11:15 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
the discrete off works with my XA2:
discrete on does not work: I use 'play' command which will turn the unit on
|
|
| Post 20 made on Wednesday April 18, 2007 at 20:24 |
jeff@dm Long Time Member |
Joined:
Posts: | January 2007
41 |
|
|
I just finished up an RP6/T3 customer system with a Toshiba HDXA2 and the galileo01 power off code works perfectly. The power on doesn't work, but the power on code that Mark Rubin offered on this topic re-iterated below works just fine...between the two, power discreets for the HDXA2 are now in good shape:
try this hex code for XA2 ON (it is the PLAY command: also discrete ON:
0000 006D 0022 0002 0156 00AD 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 05FC 0156 0055 0015 0E5C
Jeff
|
|
| Post 21 made on Sunday April 29, 2007 at 09:47 |
avs_one Long Time Member |
Joined:
Posts: | September 2004
46 |
|
|
Has anyone had a problem with the IR receiver on the HD-XA2 unit? I learned the remote with the IR-PRO and tried different distances and tap/hold methods for learning none with any success. Tried adjusting intensity on the RP-6 and moved the emitter around on the front window...still nothing reliable. Out of a total of >100 button presses (different learning techniques and placement) I had success with about 3 button presses. Any ideas? Could someone send me the above IR file with discrete OFF command included? Thanks guys.
|
|
| Post 22 made on Sunday April 29, 2007 at 11:55 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
no problems with XA2 IR commands: I learned with an IR Pro
I emailed you the codes with discrete off
|
|
| Post 23 made on Sunday April 29, 2007 at 17:52 |
avs_one Long Time Member |
Joined:
Posts: | September 2004
46 |
|
|
|
| Post 24 made on Monday April 30, 2007 at 03:11 |
davenport Senior Member |
Joined:
Posts: | October 2006
1,361 |
|
|
Re: Power On. I haven't used an XA2 yet, but on the XA1 "Play", or "Open/Close" will Power On the unit.
|
|
| Post 25 made on Monday May 21, 2007 at 15:13 |
Do you have the Toshiba DVD HD A2 Hex codes? I'd be grateful. Thanks.
|
|
| Post 26 made on Monday May 21, 2007 at 18:14 |
jeff@dm Long Time Member |
Joined:
Posts: | January 2007
41 |
|
|
Glack,
Look at my post from April 18th. I have a customer HD XA2 working perfectly with those codes for discreet on and discreet off..
Jeff
|
|
| Post 27 made on Tuesday May 22, 2007 at 14:17 |
The8thst Long Time Member |
Joined:
Posts: | October 2004
364 |
|
|
On May 21, 2007 at 18:14, jeff@dm said...
Glack,
Look at my post from April 18th. I have a customer HD
XA2 working perfectly with those codes for discreet on
and discreet off..
Jeff The serial protocol for the XA2 lists discrete power commands.... so just do 232.
|
|
| OP | Post 28 made on Tuesday May 22, 2007 at 16:42 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
We ended up using 232 with the crestron system so IR wasnt needed, Although if a system comes up with RTI and ir is needed then the codes would be good to have...Or use 232
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 29 made on Monday May 28, 2007 at 23:06 |
PhilipSpringer Long Time Member |
Joined:
Posts: | March 2005
47 |
|
|
"There's a pool (RS-232) and a pond (IR)... The pond would be good for you"
Last edited by PhilipSpringer
on May 30, 2007 20:44.
|
|
| Post 30 made on Wednesday June 20, 2007 at 11:30 |
I am doing the exact setup RP6 and T3 and I cannot find the XA2 files any suggestions?
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
