 |
 |
|
|
RTI Control Systems Forum - View Post
|
|
 |
|
|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Toshiba HD DVD codes This thread has 36 replies. Displaying posts 1 through 15. |
|
| Post 1 made on Friday January 5, 2007 at 19:10 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
Hi All, does anyone have the new Toshiba HD-A1 HD dvd codes
Thanks
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 2 made on Friday January 5, 2007 at 20:35 |
ErikS Active Member |
Joined:
Posts: | July 2003
699 |
|
|
|
| OP | Post 3 made on Friday January 5, 2007 at 21:04 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
Thanks Erik
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 4 made on Saturday January 6, 2007 at 16:45 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
I have a new file of the new HD XA2 IR codes from an IR Pro
the XA2 is excellent also have the Sony BDP-S1
email me...
|
|
| Post 5 made on Sunday January 7, 2007 at 00:37 |
femi Long Time Member |
Joined:
Posts: | December 2002
153 |
|
|
markrubin,
does discrete on & off work on the XA2?
|
|
| Post 6 made on Sunday January 7, 2007 at 08:39 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
On January 7, 2007 at 00:37, femi said...
markrubin,
does discrete on & off work on the XA2? NO: still no discrete for on/off as far as I know: I am still looking!
|
|
| Post 7 made on Sunday January 7, 2007 at 09:39 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
someone posted an untested hex code for the discrete off but RTI software does not recognize it: it is incomplete. Here it is for anyone that wants to play around with it:
900A 006D 0000 0001 45B5 936C
(untested code: does not work as is)
|
|
| Post 8 made on Monday January 8, 2007 at 15:59 |
cjoneill Select Member |
Joined:
Posts: | December 2002
2,174 |
|
|
Anyone have them for the A2?
Thanks,
CJ
|
I'm not a pro |
|
| Post 9 made on Monday January 8, 2007 at 18:59 |
galileo01 Long Time Member |
Joined:
Posts: | November 2002
236 |
|
|
I have not tested these but you can give them a try.
Power On:
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94
Power Off:
0000 006D 0022 0002 0157 00AC 0015 0041 0015 0016 0015 0041 0015 0016 0015 0016 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0016 0015 0016 0015 0041 0015 0041 0015 0016 0015 0041 0015 0041 0015 0016 0015 0689 0157 0056 0015 0E94
|
Scott Harris |
|
| Post 10 made on Monday January 8, 2007 at 19:00 |
Springs Super Member |
Joined:
Posts: | May 2002
3,238 |
|
|
That is a Pronto NG code. If I am on a install tomorow I will try learning it to the IRpro... But John Fine could probably translate that code. Oops... that post above was quicker then I type.
Last edited by Springs
on January 9, 2007 05:18.
|
|
| Post 11 made on Monday January 8, 2007 at 21:46 |
cjoneill Select Member |
Joined:
Posts: | December 2002
2,174 |
|
|
You can paste them straight into the IR Library Manager since they start with 0000. CJ On January 8, 2007 at 19:00, Springs said...
That is a Pronto NG code. If I am on a install tomorow
I will try learning it to the IRpro...
But John Fine could probably translate that code.
|
I'm not a pro |
|
| Post 12 made on Monday January 8, 2007 at 21:51 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
galileo01 I tested the OFF hex code (pasted right into Library) and it works! the On code does not seem to work edit: this applies to XA2
Last edited by markrubin
on January 9, 2007 13:41.
|
|
| Post 13 made on Tuesday January 9, 2007 at 12:43 |
charlesB2 Lurking Member |
Joined:
Posts: | January 2007
1 |
|
|
I have the discrete ir codes for Toshiba HD A1SN but they don't work with my player. Is there another set of codes for the HD A1? I don't have the XA1.
|
|
| OP | Post 14 made on Saturday January 13, 2007 at 00:08 |
Glackowitz RC Moderator |
Joined:
Posts: | May 2002
3,793 |
|
|
On January 9, 2007 at 12:43, charlesB2 said...
I have the discrete ir codes for Toshiba HD A1SN but they
don't work with my player. Is there another set of codes
for the HD A1? I don't have the XA1. Charles, Codes sent to you tonight..HD-A1 codes not the HD-A1SN codes
|
There's no worse feeling than that millisecond you're sure you are going to die after leaning your chair back a little too far. |
|
| Post 15 made on Saturday January 13, 2007 at 22:50 |
markrubin Founding Member |
Joined:
Posts: | February 2002
919 |
|
|
try this hex code for XA2 ON (it is the PLAY command: also discrete ON:
0000 006D 0022 0002 0156 00AD 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 05FC 0156 0055 0015 0E5C
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
|
|
|
