|
|
 |
|
The following page was printed from RemoteCentral.com:
| Topic: | Direct TV Remote RC16 This thread has 32 replies. Displaying posts 16 through 30. |
|
| Post 16 made on Sunday October 8, 2006 at 13:46 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
On October 8, 2006 at 13:37, Carl6 said...
A question about the 2nd R15 remote codes. The primary
code is enabled in other remotes or devices by using the
Sat 1377 code. What is the code (or whatever) to activate
or enable the secondary (AV1) code in a remote (so the
remote would work with an R15 set to the AV1 secondary
code)?
The specific remote I am attempting to use is the one
built into the Slingbox.
Thanks,
Carl The UEI remote code for AV1 codeset is sat 1378. I have no idea if its in the slingbox? The only UEI remote with it preset is the ofa urc-6960.
|
|
| Post 17 made on Sunday October 8, 2006 at 13:53 |
Carl6 Lurking Member |
Joined:
Posts: | October 2006
2 |
|
|
That did the trick, THANKS!.
Slingbox was smart enough to use the DirecTV remote graphic when I entered the 1378 code.
Carl
|
|
| Post 18 made on Sunday October 8, 2006 at 14:12 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
On October 8, 2006 at 02:01, Ernie Bornn-Gilman said...
Isn't Edmund the greatest? Don't kid yourself -- it isn't
just newbies who benefit from his amazing knowledge.
We all do. He is unique in just plain having answers
like this, all apparently at his fingertips!
Thanks, Edmund! Thanks Ernie I really appreciate that alot. : )
|
|
| Post 19 made on Sunday October 8, 2006 at 19:59 |
bookaroni Long Time Member |
Joined:
Posts: | December 2004
458 |
|
|
I feel like I just watched an episode of Stump The Schwab. Except his name is Edmund.
|
|
| Post 20 made on Saturday November 18, 2006 at 16:59 |
digitald Lurking Member |
Joined:
Posts: | November 2006
1 |
|
|
On May 30, 2006 at 16:57, edmund said...
You abandon the oem remotes and get yourself a universal
like the mx850, 650, or 350. In combination with the
addressable RF basestations, the MRf250 or 300, you can
control them separately. This was the exact solution I was looking for too, thanks! I have to control 6 r15s with one remote, so I think I'm going with the mx-850 and the mrf300 combo... Are there any gotcha's, I should be aware of? additional antenna, cabling...
|
|
| Post 21 made on Wednesday December 13, 2006 at 00:34 |
iceman41385 Lurking Member |
Joined:
Posts: | December 2006
1 |
|
|
how do i program the remote for tv no idea the remote is a rc23
|
|
| Post 22 made on Tuesday August 28, 2007 at 15:07 |
donleycott Lurking Member |
Joined:
Posts: | August 2007
6 |
|
|
I have almost the same problem that you had but your solution did not work. I have two HR20-700s (DirecTV HD DVRs) and they are in the same room so I need to be able to set up the remotes with different codes so 1 remote controls only 1 of the DVRs and the other remote controls the other DVR. Step two of the proceedure above does not work for my remote (an RC64R).
Could someone please give me a proceedure that works for the RC64R remote?
Pat
|
|
| Post 23 made on Tuesday August 28, 2007 at 17:53 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
On August 28, 2007 at 15:07, donleycott said...
I have almost the same problem that you had but your solution
did not work. I have two HR20-700s (DirecTV HD DVRs)
and they are in the same room so I need to be able to
set up the remotes with different codes so 1 remote controls
only 1 of the DVRs and the other remote controls the other
DVR. Step two of the proceedure above does not work for
my remote (an RC64R).
Could someone please give me a proceedure that works for
the RC64R remote?
Pat check the other thread: [Link: remotecentral.com]
|
|
| Post 24 made on Monday September 3, 2007 at 13:03 |
Bryan Harveston Lurking Member |
Joined:
Posts: | February 2004
2 |
|
|
Edmund,
I have a question. I have a Viewsonic N3250w television in my exercise room. I did not know at the time of purchase that they have their own proprietary remote system. So right now I have the Directv HDTV box (no DVR capability) and I use the RF capability to change channels since the box is in another room. But to turn on the television power and increase and decrease the volume, I have to keep the TV remote available.
1. Do you know any codes that might work in the Directv remote that will literally just Power ON and increase/ decrease the volume for the Viewsonic TV?
2. Do you know a trick where I can get the Directv Remote to IR Learn the buttons for a) Power On b) Volume Up c) Volume Down? These are literally all I need and then I can get rid of the TV remote.
Thanks for your help.
|
|
| Post 25 made on Monday September 3, 2007 at 13:15 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
On September 3, 2007 at 13:03, Bryan Harveston said...
Edmund,
I have a question. I have a Viewsonic N3250w television
in my exercise room. I did not know at the time of purchase
that they have their own proprietary remote system. So
right now I have the Directv HDTV box (no DVR capability)
and I use the RF capability to change channels since the
box is in another room. But to turn on the television
power and increase and decrease the volume, I have to
keep the TV remote available.
1. Do you know any codes that might work in the Directv
remote that will literally just Power ON and increase/
decrease the volume for the Viewsonic TV? The newest directv remote, the rc64, lists 10 viewsonic tv codes. You can buy the RF version the rc64rb from directv for $25. 2. Do you know a trick where I can get the Directv Remote
to IR Learn the buttons for a) Power On b) Volume Up c)
Volume Down? These are literally all I need and then I
can get rid of the TV remote.
Thanks for your help. sorry, no current directv remote has learning feature.
|
|
| Post 26 made on Wednesday September 5, 2007 at 00:55 |
Bryan Harveston Lurking Member |
Joined:
Posts: | February 2004
2 |
|
|
Edmund,
Thanks for your help. I found out the latest Directv HD DVR Receiver I purchased about a month ago (August 15th, 2007), came with about 4 other Viewsonic codes. To try it out, what do I do to get this new Directv remote to connect with the Directv HD Receiver in my exercise room that was installed last year?
|
|
| Post 27 made on Wednesday September 5, 2007 at 02:10 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
If the receiver is set to IR, and if its a H20, then use codes 00001 or 00002.
1. dtv
2. press and hold MUTE & SELECT for two blinks
3. enter 0 0 0 0 1 or 0 0 0 0 2
If the receiver is set to RF:
1. dtv
2. press and hold MUTE & SELECT for two blinks
3. enter 0 0 0 0 1
4. dtv
5. press and hold MUTE & SELECT for two blinks
6. enter 9 6 1
7. press CH UP
8. enter the last 6 digits of the receiver ID #, found on a sticker in the access card compartment
9. press SELECT
|
|
| Post 28 made on Thursday November 29, 2007 at 00:49 |
xsnerg Lurking Member |
Joined:
Posts: | November 2007
2 |
|
|
On May 30, 2006 at 16:57, edmund said...
You abandon the oem remotes and get yourself a universal
like the mx850, 650, or 350. In combination with the
addressable RF basestations, the MRf250 or 300, you can
control them separately.
|
|
| Post 29 made on Thursday November 29, 2007 at 00:56 |
xsnerg Lurking Member |
Joined:
Posts: | November 2007
2 |
|
|
On May 30, 2006 at 16:57, edmund said...
You abandon the oem remotes and get yourself a universal
like the mx850, 650, or 350. In combination with the
addressable RF basestations, the MRf250 or 300, you can
control them separately. I'm trying to program my MX-850 for my new Direct TV subscription, but there is no code for my model HR21-700. Any recommendations? {THis is tryingto program by Device: TV, IR Data from: SAT. I also tried Device:TV, IR Data from: DVR}
|
|
| Post 30 made on Thursday November 29, 2007 at 02:34 |
edmund Elite Member |
Joined:
Posts: | April 2002
13,841 |
|
|
On November 29, 2007 at 00:56, xsnerg said...
I'm trying to program my MX-850 for my new Direct TV subscription,
but there is no code for my model HR21-700. Any recommendations?
{THis is tryingto program by Device: TV, IR Data from:
SAT. I also tried Device:TV, IR Data from: DVR} Use SAT code 173. Which is the same as code 00001 on the white remotes.
|
|
 |
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|
