|
|
|
The following page was printed from RemoteCentral.com:
Topic: | Almost April - MX-900 shipping soon? This thread has 93 replies. Displaying posts 76 through 90. |
|
Post 76 made on Tuesday April 11, 2006 at 17:51 |
Slimfoot Select Member |
Joined: Posts: | October 2003 1,562 |
|
|
Just got mine about an hour ago. I like the page hide feature.
|
Sir, my concern is not whether God is on our side; my greatest concern is to be on God's side, for God is always right. Abraham Lincoln
|
|
Post 77 made on Tuesday April 11, 2006 at 18:29 |
gmealer Long Time Member |
Joined: Posts: | April 2006 31 |
|
|
rgbyhkr:
Try disabling the default sound on the remote. I think you actually have to do this from the programming software, not by turning the volume down, so that the sound never plays. I read somewhere or the other that this would fix the 950's lag, so it presumably would help on the 900 too.
|
|
Post 78 made on Tuesday April 11, 2006 at 18:51 |
KCThirstyEar Active Member |
Joined: Posts: | January 2003 551 |
|
|
The first thing I did when I got the 900 was shut that beep off. It drives me nuts. I experienced no lag.
|
KC Audio Artisans |
|
OP | Post 79 made on Tuesday April 11, 2006 at 20:26 |
rgbyhkr Long Time Member |
Joined: Posts: | October 2002 104 |
|
|
Ok, 2 questions. First, is there any other way to disable the beep other than the settings menu accessed directly on the remote itself (holding Watch and Enter simultaneously to access it)? Secondly, for IR Repeat, do you just adjust that field in the IR Database Navigator once and then it is universally set for all new codes you import from the IR database? Does that setting also then apply to entire devices you import from the IR database as well?
Thanks,
Jeff
|
|
Post 80 made on Wednesday April 12, 2006 at 13:56 |
gmealer Long Time Member |
Joined: Posts: | April 2006 31 |
|
|
File | User Preferences seems to be the place for removing the beep. Haven't tried it on mine yet.
I'm curious about the repeat too. The IR Database accessed from the Program menu--the one where you bring in whole devices--doesn't have a repeat setting, and neither do the buttons it creates. You appear to only get access to configurable repeat if you drag the button from the IR Database Navigator, and can only change the repeat after the fact if you drag to a macro. I'm curious what devices populated via the Program menu get for a default repeat setting.
|
|
Post 81 made on Wednesday April 12, 2006 at 13:57 |
gmealer Long Time Member |
Joined: Posts: | April 2006 31 |
|
|
Oops, forgot my context. This is on the MX950 editor, but I bet the MX900 editor is laid out similarly.
|
|
Post 82 made on Wednesday April 12, 2006 at 16:44 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
On April 11, 2006 at 20:26, rgbyhkr said...
Ok, 2 questions. First, is there any other way to disable the beep other than the settings menu accessed directly on the remote itself (holding Watch and Enter simultaneously to access it)? No. Secondly, for IR Repeat, do you just adjust that field in the IR Database Navigator once and then it is universally set for all new codes you import from the IR database? I believe it only works with individual commands brought in from the navigator. Mike www.SurfRemoteControl.com
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
OP | Post 83 made on Wednesday April 12, 2006 at 16:47 |
rgbyhkr Long Time Member |
Joined: Posts: | October 2002 104 |
|
|
On April 12, 2006 at 13:57, gmealer said...
Oops, forgot my context. This is on the MX950 editor, but I bet the MX900 editor is laid out similarly. Unfortunately, the user preferences selection is absent from the File menu in the 900's editor. However, the 900 is the same with respect to the repeat selection. There's no option to select repeat count when importing entire devices, only when opening the IR Database Navigator for importing of buttons one by one. That's why I asked about a possible global or universal setting. If I change that repeat value and then go to another device in the IR Database or even close the IR Database Navigator and re-open it, that change is remembered. By the way, I did try importing a few buttons like Tivo FF/REW with the repeat set at 1. No dice. It's the same result, unfortunately. Jeff
|
|
Post 84 made on Wednesday April 12, 2006 at 17:10 |
gmealer Long Time Member |
Joined: Posts: | April 2006 31 |
|
|
Well, stuff added by device definitely repeats when held down (or at least things like volume buttons do). That'd probably be the easiest way to check to see if the navigator sets a default--toggle that setting off in the navigator, then go to the Program menu and add a device from there.
But I suspect they've either preset the repeats in the database or it always uses 3/repeat-when-held-down.
|
|
Post 85 made on Wednesday April 12, 2006 at 18:35 |
Surf Remote Loyal Member |
Joined: Posts: | July 2001 5,958 |
|
|
By the way, I did try importing a few buttons like Tivo FF/REW with the repeat set at | 1. No dice. It's the same result, unfortunately. You may be better off looking for another file here on RC or learning the commands. Just to clarify, the "repeat" setting allows you to program a single button with a "hold down" without having to hold the button down. Some projectors require that you hold down the Power button for a second or more to turn them on. Without the repeat feature, you couldn't turn the projector on as part of a macro. The 3-repeat is the default setting and usually doesn't cause any problems with commands being duplicated on a single button push.
|
www.SurfRemoteControl.comTHX-certified video calibrator and contributing writer, ProjectorReviews.com |
|
Post 86 made on Wednesday April 12, 2006 at 19:42 |
Wharf Rat Long Time Member |
Joined: Posts: | December 2005 11 |
|
|
On April 6, 2006 at 02:26, pilgram said...
I'm sure they can't be available yet!
I just did a search on their favorite "dealer" site and only came up with a bunch of golf clubs! Well, there is one on there now. That didn't take long did it?
|
|
Post 87 made on Thursday April 13, 2006 at 00:23 |
flash214 Long Time Member |
Joined: Posts: | March 2006 73 |
|
|
I 'm still a little confused. Did we conclude that the lag on the MX-900 is eliminated by turning off the default beep by changing the setting on the remote (and not by a programming change)?
Also, does the IR repeat function have anything to do with the lag problem or is that a completely different issue?
|
|
Post 88 made on Thursday April 13, 2006 at 00:30 |
flash214 Long Time Member |
Joined: Posts: | March 2006 73 |
|
|
One more thing. When will a programming manual be available (in pdf format) for the MX-900? The Universal site lists it with a link but there is nothing there when you click the link.
|
|
Post 89 made on Thursday April 13, 2006 at 01:05 |
gmealer Long Time Member |
Joined: Posts: | April 2006 31 |
|
|
flash214:
Dunno that we've determined anything yet. rgbyhkr, does yours still lag if you turn the beep volume all the way down? Some devices realize that 0 volume means don't play it, others don't.
The only reason I suggested it is because the RC review of the MX950 mentions that you can't press the button repeatedly as fast if it's emitting a sound. That sounded in line with the Tivo issue rgbyhkr described.
I've not noticed any lag on my (audible) MX950, really, but it's running in IR-only mode right now.
|
|
Post 90 made on Thursday April 13, 2006 at 02:42 |
pilgram Loyal Member |
Joined: Posts: | November 2004 5,684 |
|
|
On April 12, 2006 at 19:42, Wharf Rat said...
Well, there is one on there now. That didn't take long did it? The marketing machine has spoken! So much for "limited distribution". Granted, he is a 'new dealer' with zero sales so far.
|
Every day is a good day.......some are just better than others!
Proud to say that my property is protected by a high speed wireless device! |
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|