Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Previous section Next section Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Topic:
Eiki LC-WUL100 Power on code HELP!
This thread has 3 replies. Displaying all posts.
Post 1 made on Friday December 8, 2017 at 15:12
jimbo34
Junior Member
Joined:
Posts:
December 2017
2
Hi,

My goal is to have this projector power on and power off using an IR blaster that is currently attached. I have the power off function working but I cant seem to find the right Pronto hex code to turn the projector on.

I am using universal remote complete control program.

The only guide eiki offers is a pdf that I don't understand:

[Link: eiki.com]
then search lc-WUL100

any suggestions are welcomed!!!!

thank you everyone
Post 2 made on Sunday December 10, 2017 at 07:28
Barf
Long Time Member
Joined:
Posts:
August 2013
188
Leaving out the mouse and joystick commands, the document you do not understand says that it is NEC-type signals. A NEC-type signal (for example NEC1) has three parameters, often called D (device), S (subdevice), and F (function). You can use IrScrutinizer to compute the Pronto Hex from these parameters (Pane Generate, select Protocol nec1, fill in D, S, and F, press Generate).

The statement

Custom Code + Custom Code : 8 patterns as below
33h+00h(Default; code1), 33h+11h(code2), 33h+22h(code3), 33h+33h(code4),
33h+44h(code5), 33h+55h(code6), 33h+66h(code7), 33h+77h(code8)

probably (I MEAN "probably") means that D = 0x33 = 51, S is 0x00 (for default), S = 0x11 = 17 (for code2), etc. The middle number in the table is the F. So to compute for example "ON", enter "0x33" (all the four characters) for D, 0x00 into the S field, and 0x11 for F. Press "Generate". Gives

0000 006C 0022 0002 015B 00AD 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 06A4 015B 0057 0016 0E6C
OP | Post 3 made on Tuesday December 19, 2017 at 11:17
jimbo34
Junior Member
Joined:
Posts:
December 2017
2
On December 10, 2017 at 07:28, Barf said...
Leaving out the mouse and joystick commands, the document you do not understand says that it is NEC-type signals. A NEC-type signal (for example NEC1) has three parameters, often called D (device), S (subdevice), and F (function). You can use IrScrutinizer to compute the Pronto Hex from these parameters (Pane Generate, select Protocol nec1, fill in D, S, and F, press Generate).

The statement

probably (I MEAN "probably") means that D = 0x33 = 51, S is 0x00 (for default), S = 0x11 = 17 (for code2), etc. The middle number in the table is the F. So to compute for example "ON", enter "0x33" (all the four characters) for D, 0x00 into the S field, and 0x11 for F. Press "Generate". Gives

0000 006C 0022 0002 015B 00AD 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 06A4 015B 0057 0016 0E6C

I want to thank you VERY much on this one. The code you provided worked and I was able to test it today. I've read your post about 103 times and I don't understand how NEC type signals are formed. I get that there are three parts to it; D, S, and F. how did you come to the conclusion in this senerio that D = 0x33 = 51 for example and the other two?
Post 4 made on Wednesday December 20, 2017 at 08:28
Barf
Long Time Member
Joined:
Posts:
August 2013
188
On December 19, 2017 at 11:17, jimbo34 said...
I want to thank you VERY much on this one. The code you provided worked and I was able to test it today. I've read your post about 103 times and I don't understand how NEC type signals are formed. I get that there are three parts to it; D, S, and F.

That is all you need to know. You plug these numbers into IrScrutinizer (for example) and it computes the hex (for example) for you.

how did you come to the conclusion in this senerio that D = 0x33 = 51 for example and the other two?

Basically, I was guessing on the basis of the verbal description. Recall the word "probably"?

Nice that I was able to help.


Jump to


Protected Feature Before you can reply to a message...
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now.

Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.

Hosting Services by ipHouse