Your Universal Remote Control Center
RemoteCentral.com
Discrete Code Hunter Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 3 made on Tuesday December 19, 2017 at 11:17
jimbo34
Lurking Member
Joined:
Posts:
December 2017
2
On December 10, 2017 at 07:28, Barf said...
Leaving out the mouse and joystick commands, the document you do not understand says that it is NEC-type signals. A NEC-type signal (for example NEC1) has three parameters, often called D (device), S (subdevice), and F (function). You can use IrScrutinizer to compute the Pronto Hex from these parameters (Pane Generate, select Protocol nec1, fill in D, S, and F, press Generate).

The statement

probably (I MEAN "probably") means that D = 0x33 = 51, S is 0x00 (for default), S = 0x11 = 17 (for code2), etc. The middle number in the table is the F. So to compute for example "ON", enter "0x33" (all the four characters) for D, 0x00 into the S field, and 0x11 for F. Press "Generate". Gives

0000 006C 0022 0002 015B 00AD 0016 0041 0016 0041 0016 0016 0016 0016 0016 0041 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0041 0016 0016 0016 0016 0016 0016 0016 0016 0016 0041 0016 0041 0016 0041 0016 0016 0016 0041 0016 0041 0016 0041 0016 06A4 015B 0057 0016 0E6C

I want to thank you VERY much on this one. The code you provided worked and I was able to test it today. I've read your post about 103 times and I don't understand how NEC type signals are formed. I get that there are three parts to it; D, S, and F. how did you come to the conclusion in this senerio that D = 0x33 = 51 for example and the other two?


Hosting Services by ipHouse