|
|
|
The following page was printed from RemoteCentral.com:
Topic: | IP Control for Sony tvs This thread has 19 replies. Displaying posts 1 through 15. |
|
Post 1 made on Wednesday January 10, 2018 at 23:07 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
never done IP before? can anyone give me a quick start on learning my first one? sony display, power discretes? is there a IP library? is it in drivers? my driver library is empty? ive only ever done ir control (dont laugh)
thanks
|
|
|
Post 2 made on Wednesday January 10, 2018 at 23:36 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
Unless you intend to create your own driver/module...it would help to know what your control system is.
|
|
OP | Post 3 made on Thursday January 11, 2018 at 00:36 |
pesci Senior Member |
Joined: Posts: | August 2006 1,211 |
|
|
my bad...RTI lol im and idiot......
that is extremely important LOL
|
|
|
Post 4 made on Thursday January 11, 2018 at 06:39 |
Don Heany Senior Member |
Joined: Posts: | September 2008 1,178 |
|
|
Sony Bravia IP driver from RTI is available- but haven’t personally used it. Have migrated away from RTI. What we do now for C4 at least is set a static addy and set a “preshare key”. A while back an update defaulted the key to off, thus breaking control. Additionally- occasional android errors have popped up- cache overflow etc... Have 3 setups controlled via WiFi and work perfectly (knocks on wood) though this is frowned upon.
|
|
Post 5 made on Thursday January 11, 2018 at 07:17 |
I’ve used it. Works fine. Follow the info in the get info file that comes with the driver.
|
|
Post 6 made on Thursday January 11, 2018 at 07:36 |
Diskreet Long Time Member |
Joined: Posts: | February 2011 225 |
|
|
On January 11, 2018 at 07:17, gerard143 said...
I’ve used it. Works fine. Follow the info in the get info file that comes with the driver. Look at the Get Info page, look at the sample file that comes with it for pairing the processor with the TV, using it on many jobs to great success.
|
The Future's Bright, The Future's Controllable. |
|
Post 7 made on Thursday January 11, 2018 at 07:42 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
DO NOT USE WIFI. Anytime the power goes off, when it comes back on, the TV's will not power on via IP if they are controlled via IP. It will work if hardwired though. In Cincy we have outages probably once a month, so WiFi for IP control doesn't work for us. Also, you cannot use MAC Address reservations either. when the TV is in standby for a long period of time, it will lose its IP address and wont ping the router for one until it is turned on.
They key is to hardwire it, set the IP in the TV as static, turn on remote start, and Simple IP Control. If you do these things, it will work flawlessly.
|
Stay Hungry, Stay Foolish... |
|
Post 8 made on Thursday January 11, 2018 at 09:22 |
kgossen Super Member |
Joined: Posts: | March 2008 3,026 |
|
|
On January 11, 2018 at 07:42, vwpower44 said...
DO NOT USE WIFI. Anytime the power goes off, when it comes back on, the TV's will not power on via IP if they are controlled via IP. It will work if hardwired though. In Cincy we have outages probably once a month, so WiFi for IP control doesn't work for us. Also, you cannot use MAC Address reservations either. when the TV is in standby for a long period of time, it will lose its IP address and wont ping the router for one until it is turned on.
They key is to hardwire it, set the IP in the TV as static, turn on remote start, and Simple IP Control. If you do these things, it will work flawlessly. Now that's some useful info, thank you!!
|
"Quality isn't expensive, it's Priceless!" |
|
Post 9 made on Thursday January 11, 2018 at 10:25 |
Audiophiliac Super Member |
Joined: Posts: | August 2006 3,311 |
|
|
I have one that has been on wifi with the C4 driver, and a DHCP reservation for going on 3 years now. I know they have had more than a few power outages. No problems in that time span thus far. :)
|
"When I eat, it is the food that is scared." - Ron Swanson |
|
Post 10 made on Thursday January 11, 2018 at 10:44 |
3PedalMINI Loyal Member |
Joined: Posts: | July 2009 7,860 |
|
|
On January 11, 2018 at 10:25, Audiophiliac said...
I have one that has been on wifi with the C4 driver, and a DHCP reservation for going on 3 years now. I know they have had more than a few power outages. No problems in that time span thus far. :) +1 works flawless
|
The Bitterness of Poor Quality is Remembered Long after the Sweetness of Price is Forgotten! - Benjamin Franklin |
|
Post 11 made on Thursday January 11, 2018 at 11:56 |
Lowhz Senior Member |
Joined: Posts: | April 2012 1,168 |
|
|
On January 10, 2018 at 23:07, pesci said...
never done IP before? can anyone give me a quick start on learning my first one? sony display, power discretes? is there a IP library? is it in drivers? my driver library is empty? ive only ever done ir control (dont laugh)
thanks This is the documentation for the simple IP control [Link: tmolberg.kpolberg.net]
|
|
Post 12 made on Thursday January 11, 2018 at 16:14 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
On January 11, 2018 at 10:25, Audiophiliac said...
I have one that has been on wifi with the C4 driver, and a DHCP reservation for going on 3 years now. I know they have had more than a few power outages. No problems in that time span thus far. :) I wonder if it takes a while after an outage to get an IP address. I now that immediately after an outage or reset, the wifi ones will not turn on via IP. I bet after the power returns to the unit, it eventually does some silent bootup, gets its IP address, then it all falls into place.
|
Stay Hungry, Stay Foolish... |
|
Post 13 made on Thursday January 11, 2018 at 18:10 |
Nick-ISI Long Time Member |
Joined: Posts: | September 2004 490 |
|
|
On January 11, 2018 at 16:14, vwpower44 said...
I wonder if it takes a while after an outage to get an IP address. I now that immediately after an outage or reset, the wifi ones will not turn on via IP. I bet after the power returns to the unit, it eventually does some silent bootup, gets its IP address, then it all falls into place. I'm not so sure...we tried one on Wifi last year and it stopped responding after a power out and was still unresponsive when we attended as arranged two days later. Power had been restored for 48+ hours at this stage. We had to disable the WiFi and re-enable to get it working again. Control disappeared as soon as we tested dropping and restoring power again so we ended up going IR.
|
What do you mean you wanted it on the other wall - couldn't you have mentioned this when we prewired? |
|
Post 14 made on Friday January 12, 2018 at 14:01 |
vwpower44 Super Member |
Joined: Posts: | August 2004 3,662 |
|
|
On January 11, 2018 at 18:10, Nick-ISI said...
I'm not so sure...we tried one on Wifi last year and it stopped responding after a power out and was still unresponsive when we attended as arranged two days later. Power had been restored for 48+ hours at this stage. We had to disable the WiFi and re-enable to get it working again.
Control disappeared as soon as we tested dropping and restoring power again so we ended up going IR. I have not had a single issue with the ones that were hardwired to the network
|
Stay Hungry, Stay Foolish... |
|
Post 15 made on Saturday January 13, 2018 at 16:18 |
ckwa Long Time Member |
Joined: Posts: | February 2017 52 |
|
|
They key is to hardwire it, set the IP in the TV as static, turn on remote start, and Simple IP Control. If you do these things, it will work flawlessly. What dose the simple IP control tick box enable exactly, ive had a 9405 Sony tv about 12 months old working in IP control without be simple IP enabled, but with all other IP control settings enabled, always wondered what simple IP dose
|
|
|
Before you can reply to a message... |
You must first register for a Remote Central user account - it's fast and free! Or, if you already have an account, please login now. |
Please read the following: Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace. For information on how to advertise your service or product click here. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.
|
|