|Post 1 made on Monday February 5, 2018 at 13:39|
Out of the 5 9600s that I have, one has major issues connecting and staying connected to the WiFi network. All have the same firmware and all run the same xcf file. I have tried searching and reading about the networking, but since the other 9600s connect quickly and stay connected until sleeping, I think something must be different or wrong with the one 9600. One question I have is that during a battery replacement (I have replaced the batteries in all of the 9600s) could I have damaged (not fatally) the antenna or ??? Could it be a different generation of 9600s? Any clues would be appreciated.
|Post 2 made on Friday February 9, 2018 at 21:48|
|Post 3 made on Sunday February 18, 2018 at 14:48 |
Long Time Member
Compare the firmware with the others in the settings page.
Try it with the others turned off.
Try resetting the router. Power off then on.
Try on a different router completely.
Try swapping the battery with one of the others.
You could also reload or swap the configuration with one of the others.
Post all the things you have tried with the results.
Project Boredom 2 is here. [Link: mediafire.com]
Check Version 1 & 2 out in the files section.
Please read the following:
Unsolicited commercial advertisements are absolutely not permitted on this forum. Other private buy & sell messages should be posted to our Marketplace
. For information on how to advertise your service or product click here
. Remote Central reserves the right to remove or modify any post that is deemed inappropriate.