On 01/22/03 14:31, markdl said...
Dave12345 - I don't know what to tell you. Both
of the address 1 and 2 code sets have been tested
on a 301 and 508 and they do work. Are you sure
that you have the latest software versions on
your receivers from dish? The discrete functionality
was added in the software updates that came in
December. The reason that these codes are shorter
than the universal set is that the universal set
sent the same command to the receiver 3 times.
The codes that I posted send the command 1 time
to the receiver.
The codes won't work on the expressview receivers
until their software has been updated to recognize
them.
THANKS for the reply!! The only thing that may be different is the way I am transferring the codes. I'm using my palm pilot a remote control program that lets me sync the hex codes to the palm pilot. Then I just point it at my remote and learn the keys or I can just use the palm pilot as a remote. It has worked fine for all other hex codes except the dish discretes - also I am pretty sure that I have the latest dish software version. The palm pilot remote software has an IR frequency range of 32.7 up to 455.0 that is configurable, does that make a difference? Also, the program is call OmniRemote Pro. Thanks for your help.
Dave
