Post 37 made on Thursday July 1, 2004 at 10:12 |
PHSJason Advanced Member |
Joined: Posts: | December 2002 994 |
|
|
In order to use one of the codes above, you will need to cut/paste the hex data(the long string of number WITHOUT the device/function code, just the numbers) into the add IR protion of the software. I just downloaded and installed the Marantz RC3200 editor software and you need to open a button, then click "Add IR code", which brings up the IR code window. From here click "Edit IR" which open a window where you can cut/paste this information into the software. Try the cut/paste method and make sure you are using software version 1.4.6 which adds support for pasting Pronto hex codes. The software that came in the box with the remote may not have this feature.
As for input codes for the 360, I am sorry but numerous others have reported that they do not exist. If you would like, I can send you a file that you can use to test all 256 commands for the 360 and see if you can find the input commands.
Jason
|
|
|
|