On May 4, 2014 at 15:28, EXT said...
How do you get all the hoses connected to the spigots in such a crowded space inside the inaccessible tower?
The tower is an assembly of 3 tap collars and each side of the tower is completely independent of the other (12 taps are fed through the left leg, 9 through the right).
I assembled the guts on a table top using a spacing jig I made to keep the draft collars at the right seperation. Then slid the completed insulated assembly into the draft collars.
The manufacturer of the tower parts explicitly told me that it would work/fit but it did... barely.