Thanks very much for your time. The following solved my remote not responding issues.
On April 11, 2012 at 19:00, 3FG said...
Let's try the following.
A. Do a partial reset
1) Press setup until 2 blinks
2) Enter 980
The remote should blink 4 times.
B. Turn off cable setup code lock
1) Press CBL
2) Press Setup until 2 blinks
3) Enter 982
The remote should blink 4 times. If it blinks twice, do the procedure again.
C. Assign setup code 01376 to CBL
1) Press CBL
2) Press Setup until 2 blinks
3) Enter 01376
The remote should blink 2 times.
Check if the remote will control the cable box. If not, try C. with 01982.
D. Assign setup code 10000 to TV
1) Press TV
2) Press Setup until 2 blinks
3) Enter 10000
The remote should blink 2 times.