|
 |
|
|
Yamaha Receiver RX-V630RDS For: Philips Pronto NG By: Jukka Forss | Part of a complete system PCF file. |
|
|
|
|
Yamaha Receiver RX-V2300 (Remote model RAV-227) For: HTM MX-700 (Device) By: Al Forte | All codes for this receiver. |
|
|
|
|
 
For: URC MX-3000 By: Greg Francis | Home Automation with an MX-3000 I've been a computer programmer for longer than I care to admit. It took some time to get used to the development environment for the MX-3000, but this forum helped a LOT. I'm finally posting my RCC file that controls all electronics and lights in my house, inside and out. Many of my controls for the various devices I borrowed from various posts here. I even took some digital pics my rooms and of some of my remotes to put them in the remote either as backgrounds or to use for buttons. I also tried to standardize the layout somewhat, almost every screen has a return arrow in the lower left to go to the previous screen, each room has a lights button in the middle of the bottom edge, each room has a power on/off button in the lower right, each lights screen has an All Off button. I used a lot of variables to determine which devices were on, and each light has its own variable so when it is off the slider is red and to the left, when it is on it is green and to the right. I use X-10 modules for the holiday lights and then hide those buttons during the off season. I even have a Packer G icon on the main page which brings up the schedule with buttons on each game to switch to the proper... (more) |
|
|
Yamaha Receiver RX-V592 For: URC MX-3000 By: Greg Francis | Part of a complete system RCC file. |
|
|
|
|
 
For: Philips ProntoNEO By: Freddi | Freddi's ProntoNEO There are many bitmaps for European, international and Israeli television in the SAT section of my file. |
|
|
Yamaha Receiver RX-V2095 For: Philips ProntoNEO By: Freddi | Part of a complete system NCF file. |
|
|
|
|
 
For: Philips TS-1000 By: Brian French | Brian French's Configuration A much cleaner version that is more usable. A few new graphics. Any comments would be appreciated. |
|
|
Yamaha Receiver RX-V2095 (Remote model RAV180) For: Philips TS-1000 By: Brian French | Part of a complete system CCF file. |
|
|
|
|
For: RTI T2 By: Brian French | Brian French's System Complete System that works with IRF and power sensors to work around the Toshiba's lack of discrete codes. Everything works great. |
|
|
Yamaha Receiver RX-V2095 For: RTI T2 By: Brian French | Part of a complete system RTI file. |
|
|
|
|
 
For: Philips TS-1000 By: Jim Froumis | Jim Froumis' Pronto Includes mapping of all jog/shuttle controls for the VCR & DVD, separate record and still screens for the VCR, personally created set of Time-Warner SD channel logos, tabbed layouts where necessary and a lot more! I tried getting fancy with the graphics but ended up sticking with the clean & simple basics. |
|
|
Yamaha Receiver RX-V995 (Remote model RAV190) For: Philips TS-1000 By: Jim Froumis | Part of a complete system CCF file. |
|
|
|
|
 
For: Philips ProntoPro NG By: Peter Fullerton | Peter Fullerton's Australian PCF v6.0 Major overhaul. Updated to include all new digital only FTA channels: SBS2, ABC2, ABC3, 7-TWO and GO! Updated for new pay channels introduced in Nov 2009. Updated for Austar MyStar HQ service, including transport controls. Pay channels in HD have black background. Balance of logos is in the "extras" section at the back. Long list of archived learnt codes from previous devices. |
|
|
Yamaha Receiver RX-V1800B For: Philips ProntoPro NG By: Peter Fullerton | Part of a complete color system PCF file. |
|
|
|
|
 
For: Pronto TSU9400 By: Peter Fullerton | Australian FTA and Foxtel Configuration v1.5 Well, I've now crossed over to Foxtel (IQ2), so the HD cable channel logos are now included along with the SD Foxtel/Austar channels and transport buttons for Foxtel. Network logos for SBS2 (launched 1 June) and ABC3 (imminent) also added. Significant revision to main channel selection page. Balance of logos are in the "extras" section at the back. Enjoy. |
|
|
More results: [ < Back | Next > ]
Return to the index of all files. |
