|
 |
 
For: Philips Pronto NG By: John Makin | John Makin's Pronto NG Based on Daniel Tonks superb library. This file integrates Daniel's work into the ProntoEdit NG software which will save much work. Also includes contrast calibration and two levels of PIN protection 1: user (access to remote) and 2: admin (access to setup). |
|
|
 
For: Philips Pronto NG By: John Rodrigues | John Rodrigues' TSU3000 This is a combination of many PCFs. Thanks to all and a special thanks to David D'Arche and the Ultimate Pronto Guide. I tried to keep it as simple as possible. The TV configuration has just basic buttons. I use the Sat and DVD configurations the most. It is still a work in progress. |
|
|
 
For: Philips Pronto NG By: John Sully | John Sully's "Plain" PCF This is just a plain vanilla TSU3000 PCF. It uses stock graphics and the stock navigation system. |
|
|
 
For: Philips ProntoPro NG By: John Yates | John Yates' Layout Another attempt to get a more fluid design. I'm still learning the art of graphic creation so only 50% or so are original. PCF features multiple choices of backgrounds (8) with a consistent layout for devices. 'Top' menu selects device pages; 'Bottom' menu does macro setup for devices. |
|
|
 
For: Philips Pronto NG By: JohnL28 | John's Multizone PCF Setup A modified version of Daniel Tonks' excellent TSU3000 configuration. Very strong multi-zone support with access to 11 pieces of equipment from 10 TV's thoughout the house. 95% of the IR codes were generated using makehex and are VERY clean. For the AVR-4306, 95% is the work of Dave Swindell. I added a handful of missing discrete volume controls and cleaned up some duplicates. I also set up a pretty good "surf area" that will access TIVO, DVR, TV stations and also operate the 200-disc CD changer. |
|
|
 
For: Philips ProntoPro NG By: John David Williams | John's New CCF A full system PCF with some modified buttons and new graphics imported by me. Also the x-10 codes took ages to come up with using makehex. They now work well with the Marmitek IR7243. When I started this file there were no codes for the IR7243 - so I hope this helps. Some sections are borrowed from other people - thanks. |
|
|
 
For: Philips Pronto NG By: Jonathan Schalliol | Jonathan Schalliol's System A complete system featuring a keyboard for the SlimDevices SqueezeBox and Macros for setting of inputs on three zones. Thanks to johnsfine and Bruce Hartly for all the assistance. |
|
|
 
For: Philips ProntoPro NG By: Juan J. Achutegui | Juan Achutegui's System Full audio & video control, based mainly on the Philips default config and graphics, with most IR commands learnt from original remotes for fairly new components. |
|
|
 
For: Philips Pronto NG By: Jukka Forss | Jukka Forss' TSU3000 This system is based off Daniel Tonks' design and I have modified it to handle my needs. |
|
|
 
For: Philips ProntoPro NG By: Julian Croot | Julian's Total Control PCF This is an extensive update to my previous PCF. I have changed a few of my components, and thought it was time to give the graphics and functionality some development time. Pop-up screens now appear telling you what the remote is doing during macros. High quality images of each component appear as they are turned on / off. There are 3 viewing modes: Full AV with TV, Full AV with Projector, and TV Only. A PIN is requiired to prevent unauthorised use of the projector (the PIN for this upload is 5555). The Plasma only mode is now completly isolated and smarter looking. The page tabs have been cleaned up and the top area of the screen is more logically laid out. Finally, the 5 activity groups (Power, Audio, TV, Projector, Device) have a different image when selected to stand out better. I spent far too much time on this! Hope you find it useful! |
|
|
More : [ < Back | Next > ]
Return to the Complete System Setup Files index. |
